low voltage

Hotline

ABB S800 I/O Modules ABB DO815 Digital Output Module 24 V, 2 A, Current Sourcing

description:ABB DO815 Digital Output Module 24 V, 2 A, Current Sourcing...
BASIC INFO
Product overview

         ABB S800 I/O Modules ABB DO815 Digital Output Module 24 V, 2 A, Current Sourcing
                            DO815

ABB S800 I/O Modules ABB DO815 Digital Output Module product feature

Features
•8 channels for 24 V d.c. current sourcing outputs.
•2 isolated groups of 4 channels with under voltage detection.
•OSP sets outputs to predetermined state upon communication error.
•Output status indicators and a channel wise error flag.
•Short-circuit protection to ground and positive supply.
•Over load protection.
•Open load and short-circuit detection.
•Two output fault operation modes: Automatic reset mode and Fault latching mode.
•Inductive load driving capability.
•Filament lamp load up to 10W.
 
ABB S800 I/O Modules ABB DO815 Digital Output Module product description
The DO815 is a 8 channel 24 V digital output module for the S800 I/O. The output voltage range is 10 to 30 V and the maximum
continuous output current is 2 A @ 24 V. The outputs are protected against short circuits, and over load. The outputs are divided into two individually isolated groups with four output channels in each group.
Each output channel consists of a short circuit and over load protected high side driver with open load detection (on active signal), EMC protection components, inductive load suppression, output status indication LEDs and optical isolation barrier.
In addition to the four module LEDs, DO815 has two LEDs (one Yellow and one Red) per channel. The Yellow LED indicates the output state (Yellow = output is energized, Off = output is de-energized). The Red LED indicates channel errors such as short circuit, over load, under voltage and open load (Red = channel error, Off = no channel error).
The driver outputs provide a “free-wheel diode” to demagnetize inductive loads. No external demagnetization arrangement is required up to loads of 1J.
DO815 outputs are able to drive filament lamp loads up to 10W, but only in Automatic reset mode.
DO815 provides two protection operation modes. Each channel can be configured
to operate in one of the two modes:
1.Automatic reset mode (Default mode): The fault condition disappears, then the fault disappears, and the operation is resumed.
2.Fault latching mode (This mode in not applicable in all controllers): The output is switched off by any of the fault conditions. The fault latch remains in fault condition until reset by temporarily setting the automatic reset mode.

Other related models for ABB S800 I/O Modules ABB DO815 Digital Output Module as below
AI801 Analog Input Module, 0(4)...20 mA
AI810 Analog Input Module, 0(4)...20 mA, 0(2)...10 V
AI815 Analog Input Module
AI820 Differential Analog Input Module, +/- 20 mA, +/- 10 V, +/- 5 V (4...20 mA, 2...10 V, 1...5 V)
AI825 Galvanic Isolated Analog Input Module
AI830/AI830A RTD Input Module
AI835/AI835A Thermocouple/mV Input Module
AI843 Thermocouple/mV Input Module
AI845 Analog Input Module, single or redundant
AI880/AI880A High Integrity Analog Input Module
AO801 Analog Output Module, 0(4)...20 mA
AO810/AO810V2 Analog Output Module, 0(4)...20 mA
AO815 Analog Output Module
AO820 Galvanically Isolated Bipolar Analog Output Module
AO845/AO845A Analog Output Module, Single or Redundant
DI801 Digital Input Module, 24 V, Current Sinking
DI802 Digital Input Module, 120 V a.c./d.c, Current Sinking
DI803 Digital Input Module, 230 V a.c./d.c, Current Sinking
DI810 Digital Input Module, 24 V, Current Sinking
DI811 Digital Input Module, 48 V, Current Sinking
DI814 Digital Input Module, 24 V, Current Sourcing
DI818 Digital Input Module, 24 v, Current Sinking
DI820 Digital Input Module, 120 V a.c./d.c
DI821 Digital Input Module, 230 V a.c./d.c
DI825 Digital Input Module, 125 V d.c with SOE
DI828 Digital Input Module
DI830 Digital Input Module, 24 V d.c. with SOE, Current Sinking
DI831 Digital Input Module, 48 V d.c. with SOE, Current Sinking
DI840 Digital Input Module
DI880 High Integrity Digital Input Module
DI885 Digital Input Module, 24 V /48 V d.c. with SOE, Current Sinking
DO801 Digital Output Module 24 V, 0.5 A, Current Sourcing
DO802 Digital Output Module, 24-250 V, Relay Normally Open
DO810 Digital Output Module 24 V, 0.5 A Current Sourcing
DO814 Digital Output Module 24 V, 0.5 A, Current Sinking
DO815 Digital Output Module 24 V, 2 A, Current Sourcing
DO818 Digital Output Module 24 V, 0.5 A, Current Sinking
DO820 Digital Output Module, Relay Normally Open
DO821 Digital Output Module, Relay Normally Closed
DO828 Channel Relay Output Module
DO840 Digital Output Module
DO880 High Integrity Digital Output Module
DP820 Incremental Pulse Counter Module
DP840 Incremental Pulse Counter Module
 
If you need more information about ABB S800 I/O Modules ABB DO815 Digital Output Module, please feel free to contact me here!
Contact details

HONGKONG XIEYUAN TECH CO., LIMITED
Telephone:86-027-85880977
Mobile :86-13545206420(Whatapp&Wechat is available)
Fax:86-027-85309780
Skype:Diana@hkxytech.com
E-mail:Diana@hkxytech.com
Website:www.hkxy-lowvoltage.com
 





Pre:ABB DO814 Digital Output Module 24 V 0.5 A, Current Sinking Next:ABB S800 I/O Modules ABB DO818 Digital Output Module 24 V 0.5 A, Current Sinking