Danfoss 032F1218 EVR 10 valve: 12 mm solder connection and assembly checks
Danfoss 032F1218 identifies a EVR 10 normally closed solenoid valve body. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 032F1218 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 032F1218 |
| Manufacturer / item class | Danfoss EVR 10 normally closed solenoid valve body |
| Manufacturer family | EVR 10 normally closed valve body |
| Connection | 12 mm ODF solder connection in ordering table |
| Valve-body scope | Listed separately from electrical coil |
| Application boundary | Check refrigerant, pressure and compatible coil |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Order the correct assembly
For Danfoss 032F1218, this code identifies the EVR valve body in the manufacturer ordering table. Confirm which coil and connector are separately required.
Line fit
For Danfoss 032F1218, compare both tube sizes, direction of flow and working conditions with the installed refrigeration circuit.
Commissioning
For Danfoss 032F1218, check joint tightness and commanded opening and closing using the equipment-approved procedure.
Similar-looking Danfoss order references
These order strings resemble Danfoss 032F1218 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 032F1218; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss 032F1218 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss 032F1218 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 032F1218 identity.
