Danfoss 042N0840 AM230C coil: supply and connector verification
Danfoss 042N0840 identifies a AM230C solenoid valve coil. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 042N0840 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 042N0840 |
| Manufacturer / item class | Danfoss AM230C solenoid valve coil |
| Supply | 230 V AC, 50/60 Hz |
| Electrical connection | DIN Spade, 6.3 × 0.8 mm |
| Duty | Continuous |
| Listed enclosure | IP00 coil rating; evaluate complete assembly |
| Image scope | Shared Danfoss category collage, not exact-item photograph |
| Final selection rule | Verify complete printed code, interface and application before substitution |
Power and coil selection
For Danfoss 042N0840, compare the installed coil's AC supply and frequency with the published rating; a same-shape DC coil is not an equivalent.
Valve interface
For Danfoss 042N0840, check the actuator opening and fastening method against the installed Danfoss valve.
Electrical handover
For Danfoss 042N0840, isolate supply before handling, then check correct energization and valve response during controlled recommissioning.
Similar-looking Danfoss order references
These order strings resemble Danfoss 042N0840 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 042N0840; verify each complete code independently.
Ordering and receiving review
Request a quotation against the full Danfoss 042N0840 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.
When Danfoss 042N0840 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 042N0840 identity.
