Danfoss 075G1012 DST P110 pressure sensor: signal and process fitting review
Danfoss 075G1012 identifies a DST P110 pressure transmitter. The verified manufacturer details below apply to this order number; other codes that look similar may be different parts. The common category image is a reference collage, not a photograph of the exact Danfoss 075G1012 item.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete order number | 075G1012 |
| Manufacturer / item class | Danfoss DST P110 pressure transmitter |
| Pressure range | 0–10 bar sealed gauge |
| Output | Ratiometric signal |
| Pressure port | 7/16-20 UNF |
| Electrical connector | Round Packard Metri-Pack |
| Image scope | Shared Danfoss category collage, not an exact-model photograph |
| Final selection rule | Match complete installed label and manufacturer record before substitution |
Signal type matters
For Danfoss 075G1012, the ratiometric output is not the same interface as a conventional 4–20 mA loop. Check the controller's excitation, signal scaling and connector pins before replacement.
Process connection
For Danfoss 075G1012, confirm the 7/16-20 UNF port, sealing arrangement and installed pressure range. A sensor with the same body shape can still carry a different thread or pressure reference.
Live-system test
For Danfoss 075G1012, after installation, compare displayed pressure with a suitable reference across the expected operating range and verify the controller's alarm behavior.
Similar-looking Danfoss order references
The following codes resemble Danfoss 075G1012 in the supplied order-number set. They are search and enquiry references only, not interchangeability approvals. Verify every code's own function, ratings, interfaces and availability before ordering.
Quotation and receiving checklist
When requesting Danfoss 075G1012, provide the full printed order number, the installed equipment identity and the operating duty. Compare the supplier's quotation to the exact Danfoss 075G1012 record, including package quantity and any accessory boundary. A visually matching item with another suffix needs a separate engineering decision.
On receipt of Danfoss 075G1012, check the label, connector or mechanical interfaces, packaging and condition. Document the approved settings or test result after installation so the maintenance record continues to identify Danfoss 075G1012 unambiguously.
