low voltage

Hotline

Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX VLT AQUA Drive FC 202 | Full Order-Code Review, Motor Match and Installation Checks

description:Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX VLT AQUA Drive FC 202: technical selection, installed-unit checks and ordering notes....
BASIC INFO

Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX VLT AQUA Drive FC 202: what to confirm at the installed drive

Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX is retained here as a complete enquiry designation for the VLT AQUA Drive FC 202 family. The FC 202 family is intended for water and wastewater pump applications. Pump control functions and available hardware depend on the ordered version and commissioned parameter set. The image illustrates the Danfoss product category, not the exact Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX device.

Key technical data

Technical itemVerified value / selection note
Complete model / keyword131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX
Manufacturer familyDanfoss VLT AQUA Drive FC 202
Order-number field131Z9685
Printed type-code fieldFC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX
Rating code in designationN200; verify actual kW, output current and overload duty on the unit record
Supply identifierT4; confirm phase, voltage and frequency on the exact nameplate
Enclosure and optionsConfirm fitted enclosure, filter, keypad, fieldbus and I/O against the complete configuration
Motor and load matchCompare motor nameplate current, load type, duty cycle and site conditions
Product imageShared Danfoss category collage; not a photograph of this exact order code

Electrical rating and motor fit

Before replacing Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX, record input phase and voltage, motor kW, full-load current, overload duty and protective-device arrangement. A family-level voltage range is not proof of this unit’s exact supply. Check the actual output-current rating and any derating for ambient temperature, altitude or switching frequency.

Panel and field interfaces

For Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX, compare cabinet clearance, heat removal, cable-entry position, protective earth and motor-cable routing. Confirm the operator panel, I/O terminals, communication option and any external filter from the full equipment record. Similar-looking drive strings can need different physical interfaces.

Water-system control and feedback

For Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX, identify the pump curve, pressure or flow transmitter, dry-run protection and minimum-speed limit. Compare feedback scaling and the control mode with the approved water-system sequence before reusing settings from another FC 202.

Commissioning and acceptance

After fitting Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX, enter the actual motor-nameplate values and follow the manufacturer and site commissioning procedure. Test rotation, operating speed, load current, alarm response and safe stop conditions as applicable. Record the final settings and the complete Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX designation for future service.

Decode the complete designation

The sales-number field and the type-code field together identify Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX. Do not quote only the short family name. Compare every character with the existing nameplate and original Danfoss order record; a changed suffix can alter the enclosure, control options or approval status.

Ordering and receiving decision

Ask the supplier to confirm Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX as a complete code, including its fitted options and manufacturer status. Treat any alternative number as a separate proposal requiring a documented technical comparison. The family information above supports preliminary screening only; the exact Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX record controls the final purchase.

When Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX arrives, match the printed designation, accessory list and physical connectors against the agreed quotation. Keep the receiving and commissioning evidence with the maintenance file so future requests preserve the exact Danfoss 131Z9685 FC-202N200T4E54H4XGC7XXSXXXXAXBXCXXXXDX identity.

 

 

Pre:Danfoss 137X5023 FC-302N250T5E20H2XGCAXXSXXXXAQBPCXRXXD0 VLT AutomationDrive FC 302 | Technical Selection Notes for the Exact Enquiry Code Next:Danfoss 135X4361 FC-202N355T4E21H2XGC7XXSXXXXAXBXCXXXXDX VLT AQUA Drive FC 202 for pump and water-system drive control | Type Identity and Replacement Planning