low voltage

Hotline

Danfoss 181B0314 | VACON RS485 Modbus/N2 Option Board and Integration Check

description:Danfoss 181B0314 VACON OPT-C2-V communication option: verified technical data, selection checks and similar-looking order references....
BASIC INFO

Danfoss 181B0314: option-board identification for VACON drive service

Danfoss 181B0314 identifies a VACON OPT-C2-V communication option. The technical data below follows the cited manufacturer record for this exact code. The shared main image is a category reference and not a photograph of the exact Danfoss 181B0314 item.

Key technical data

Technical itemVerified value / selection note
Complete order number181B0314
Manufacturer / item classDanfoss VACON OPT-C2-V communication option
Danfoss reference181B0314
Option designationOPT-C2-V
Interface familyRS485 Modbus / N2
Fit ruleVerify host drive and option slot before installation
Image scopeShared Danfoss category collage, not exact-item photograph
Final selection ruleVerify complete printed code, interface and application before substitution

Host compatibility

For Danfoss 181B0314, compare the installed VACON model and slot configuration with the option record.

Network wiring

For Danfoss 181B0314, review termination, address and serial communication settings.

Commissioning

For Danfoss 181B0314, prove read/write points and fault indication with the plant controller.

Similar-looking Danfoss order references

These order strings resemble Danfoss 181B0314 visually and are listed for enquiry searches only. They can have different functions, ratings or connections. They are not automatic alternatives to Danfoss 181B0314; verify each complete code independently.

181B0385
181B0406 VACON-PAN-HMGR-MK01
181B0426
181B0957
181B0958
181B0984 SPR-CMB26429
181B2694
181B2699

Ordering and receiving review

Request a quotation against the full Danfoss 181B0314 code and the installed equipment record. Check manufacturer status, pack quantity and all relevant electrical or process interfaces. An offer based only on a similar-looking model number requires a separate technical comparison.

When Danfoss 181B0314 arrives, inspect the label and supplied connections before installation. Record the installed setting, configuration or functional test result so future service enquiries retain the exact Danfoss 181B0314 identity.

 

 

Pre:Danfoss 157B4033 | PVEH32 Passive Actuator, DIN Connector and Supply Review Next:Danfoss 037H004131 | CI 16 Contactor Ordering Identity and 230 V Coil Check