Hirschmann LRS32 industrial switch port and power planning: LRS32-7TX/3SFP/1C(942328006)
Hirschmann LRS32-7TX/3SFP/1C(942328006) is a lite-managed PoE industrial rail switch associated with the LEMUR LRS32 range. This page uses the full designation as the purchasing keyword. The shared Hirschmann collage is a category reference image, not an exact photograph of the configured LRS32-7TX/3SFP/1C(942328006) unit.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | LRS32-7TX/3SFP/1C(942328006) |
| Family | LEMUR LRS32 |
| Product form | lite-managed PoE industrial rail switch |
| Order number | 942328006 |
| Copper ports | Seven 10/100BASE-TX interfaces |
| SFP ports | Three 100/1000 Mbit/s SFP positions |
| Combo port | One copper/SFP combo interface |
| PoE budget | Up to 180 W for compatible PoE/PoE+ loads |
| Selection rule | Verify complete printed code and manufacturer record for the installed version |
Ordering and configuration checklist
When requesting LRS32-7TX/3SFP/1C(942328006), quote the full designation exactly as printed and explain the equipment role. Ask for confirmation of condition, revision, supplied accessories and the manufacturer's documented specification. If a different code is offered, compare every changed position of the designation and obtain written acceptance from the site engineer.
For LRS32-7TX/3SFP/1C(942328006), check electrical supply, connector geometry, mounting envelope, environmental limits and compatibility with any host platform. Do not transfer a family-level value to a particular suffix without checking the manufacturer record. Where a placeholder occurs in the listed code, the installed version must be read from the actual nameplate.
Receiving inspection
On receipt of LRS32-7TX/3SFP/1C(942328006), compare the package, printed type and order documentation. Inspect connectors, terminals and mechanical condition. Set aside any item whose identity or included parts differ from the approved order until the discrepancy is resolved.
Application and interface context
For LRS32-7TX/3SFP/1C(942328006), begin with the equipment already in service. List the powered devices and optical uplinks, then calculate the real PoE budget at cabinet temperature. Note the device location, connected equipment and actual operating conditions. The complete code must be compared with the physical label before deciding whether LRS32-7TX/3SFP/1C(942328006) matches the application.
A supplier offer for LRS32-7TX/3SFP/1C(942328006) should identify the manufacturer type, item number if available, accessories and any included subassemblies. A similar appearance can hide a different cable entry, port population, output rating, software level or host requirement. Record these differences explicitly rather than assuming interchangeability.
Interface record
Keep a photograph of LRS32-7TX/3SFP/1C(942328006) and its mating or adjacent hardware with the service request. List the active ports, contacts, modules or terminals, as appropriate, and note their exact cable or fiber terminations. This baseline supports a meaningful receiving inspection and helps prevent an incomplete delivery.
Installation and acceptance
Before changing LRS32-7TX/3SFP/1C(942328006), capture the pre-change wiring or network state and follow the site's authorized isolation procedure. Confirm 46–57 V DC feed, appropriate SFPs and HiEOS configuration before commissioning. Use the manufacturer's installation instructions and retain the original unit until the replacement has passed a controlled test.
After installing LRS32-7TX/3SFP/1C(942328006), verify power or continuity, relevant link and alarm indicators, and the actual application behavior. Save the test result, serial number, software revision if relevant and final configuration alongside the maintenance record. A device that powers up but does not restore the intended function should not be treated as an accepted substitute.
Service handover
The handover for LRS32-7TX/3SFP/1C(942328006) should include the final manufacturer code, as-fitted connections, any configuration backup and the reason for any approved deviation. This keeps future replacement enquiries tied to the real installation rather than a shortened family name.
Similar-looking model references
The following designations resemble LRS32-7TX/3SFP/1C(942328006) and are listed here for search and enquiry convenience. Their functions and ratings may differ; each full code requires its own fit check.
Final buyer check
Before committing to LRS32-7TX/3SFP/1C(942328006), resolve any mismatch in the full label, quotation, installed interfaces or included accessories. Confirm lead time, condition and return terms in writing. The correct complete designation matters more than a visually similar family photograph.
