Hirschmann RS30 managed switch for industrial machine networks: RS30-0802O6O6SDAE
Hirschmann RS30-0802O6O6SDAE is a managed rail-mounted Ethernet switch associated with the RS30 OpenRail switch range. This page uses the full designation as the purchasing keyword. The shared Hirschmann collage is a category reference image, not an exact photograph of the configured RS30-0802O6O6SDAE unit.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | RS30-0802O6O6SDAE |
| Family | RS30 OpenRail switch |
| Product form | managed rail-mounted Ethernet switch |
| Product role | Managed industrial rail Ethernet switch |
| Port prefix | 0802 code; verify full installed interface map |
| Gigabit | RS30 family supports Gigabit uplinks |
| Software | Record firmware and management settings |
| Power | Confirm SDAE option with installed label |
| Selection rule | Verify complete printed code and manufacturer record for the installed version |
Application and interface context
For RS30-0802O6O6SDAE, begin with the equipment already in service. Trace copper and uplink connections, including the installed optical modules if present. Note the device location, connected equipment and actual operating conditions. The complete code must be compared with the physical label before deciding whether RS30-0802O6O6SDAE matches the application.
A supplier offer for RS30-0802O6O6SDAE should identify the manufacturer type, item number if available, accessories and any included subassemblies. A similar appearance can hide a different cable entry, port population, output rating, software level or host requirement. Record these differences explicitly rather than assuming interchangeability.
Interface record
Keep a photograph of RS30-0802O6O6SDAE and its mating or adjacent hardware with the service request. List the active ports, contacts, modules or terminals, as appropriate, and note their exact cable or fiber terminations. This baseline supports a meaningful receiving inspection and helps prevent an incomplete delivery.
Ordering and configuration checklist
When requesting RS30-0802O6O6SDAE, quote the full designation exactly as printed and explain the equipment role. Ask for confirmation of condition, revision, supplied accessories and the manufacturer's documented specification. If a different code is offered, compare every changed position of the designation and obtain written acceptance from the site engineer.
For RS30-0802O6O6SDAE, check electrical supply, connector geometry, mounting envelope, environmental limits and compatibility with any host platform. Do not transfer a family-level value to a particular suffix without checking the manufacturer record. Where a placeholder occurs in the listed code, the installed version must be read from the actual nameplate.
Receiving inspection
On receipt of RS30-0802O6O6SDAE, compare the package, printed type and order documentation. Inspect connectors, terminals and mechanical condition. Set aside any item whose identity or included parts differ from the approved order until the discrepancy is resolved.
Similar-looking model references
The following designations resemble RS30-0802O6O6SDAE and are listed here for search and enquiry convenience. Their functions and ratings may differ; each full code requires its own fit check.
Installation and acceptance
Before changing RS30-0802O6O6SDAE, capture the pre-change wiring or network state and follow the site's authorized isolation procedure. Back up VLAN and redundancy settings before a rail-switch exchange. Use the manufacturer's installation instructions and retain the original unit until the replacement has passed a controlled test.
After installing RS30-0802O6O6SDAE, verify power or continuity, relevant link and alarm indicators, and the actual application behavior. Save the test result, serial number, software revision if relevant and final configuration alongside the maintenance record. A device that powers up but does not restore the intended function should not be treated as an accepted substitute.
Service handover
The handover for RS30-0802O6O6SDAE should include the final manufacturer code, as-fitted connections, any configuration backup and the reason for any approved deviation. This keeps future replacement enquiries tied to the real installation rather than a shortened family name.
Final buyer check
Before committing to RS30-0802O6O6SDAE, resolve any mismatch in the full label, quotation, installed interfaces or included accessories. Confirm lead time, condition and return terms in writing. The correct complete designation matters more than a visually similar family photograph.
