Honeywell server configuration reference: MZ-PCSV67
MZ-PCSV67 identifies a Honeywell-qualified Dell R340HWL server configuration. The documented build combines processor, memory, hot-plug SAS storage and RAID 5; use the Honeywell model code and service tag together to identify the exact approved platform revision.
Configuration table
| Selection point | Specification / confirmation |
|---|---|
| Exact model | MZ-PCSV67 |
| Honeywell model | MZ-PCSV67 |
| Base platform | Dell PowerEdge R340/R340HWL |
| Processor | Intel Xeon E-2124, 3.3 GHz in the listed platform configuration |
| Memory | 16 GB UDIMM, 2 x 8 GB, as documented |
| Storage | 4 x 300 GB 15K SAS hot-plug drives |
| Controller | PERC H730P, 2 GB cache; RAID 5 configuration |
Documented R340HWL build for MZ-PCSV67
Intel Xeon E-2124 3.3GHz / 16GB UDIMM (2x8GB) / 300GB 15K SAS 12Gb/s 2.5-inch Hot Plug drive x4 / PERC H730P 2GB cache / RAID 5
Deployment controls for MZ-PCSV67
Verify the Honeywell tab number, BIOS version, operating-system release and application support before servicing MZ-PCSV67. Check RAID state and drive firmware before replacement, then compare every disk and controller against the approved bill of materials. Keep validated recovery media and configuration backups available.
- Confirm service tag, Honeywell model code and tab/revision.
- Validate four SAS drives, H730P cache and RAID 5 state.
- Check E-2124 CPU and UDIMM population against documented build.
- Record BIOS, OS and Experion support baseline before changes.
Handover record for MZ-PCSV67
Store the service tag, storage serial numbers, RAID layout, firmware, Honeywell model and approved support release together. Use MZ-PCSV67 as the platform identifier in service and parts requests.
Verify MZ-PCSV67 against its Honeywell platform documentation before replacing any component.
