Application and fit of ABB 1SAM101923R0012
The exact ABB 1SAM101923R0012 designation is the starting point for this service decision. The item serves as uncoded manual-motor-starter shaft driver; a neighboring code may have different fit, duty or connection details.
Technical identity and selection data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SAM101923R0012 |
| Product family | ABB MSMNO |
| Component role | uncoded manual-motor-starter shaft driver |
| Complete designation | 1SAM101923R0012 |
| Device or service family | ABB MSMNO |
| Accessory | MSMNO shaft driver |
| ABB article | 1SAM101923R0012 |
| Selection | Match shaft, handle, starter and enclosure geometry |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Use the ABB 1SAM101923R0012 data as a verified starting specification, then check the delivered label and the cited manufacturer reference for option-dependent limits.
What this part does
In the identified installation, ABB 1SAM101923R0012 is selected to couple the approved external operator to a manual motor starter. The asset drawing should show the exact connection or service position; appearance is not enough to establish its function.
Ask the maintainer why ABB 1SAM101923R0012 is being changed: planned overhaul, failed diagnostic, retrofit or a damaged connection. That reason sets the acceptance test and required accompanying parts.
Evidence before ordering
Copy ABB 1SAM101923R0012 from the installed part or an approved bill of materials, including punctuation, option letters and article code. Keep a label photograph with the enquiry.
For ABB 1SAM101923R0012, resolve starter family, shaft length, interlock and door depth. Verify mechanical size, terminal style, supply or control rating and revision before accepting a substitute.
Compatibility boundary
ABB 1SAM101923R0012 should be compared with the exact host equipment, not only the broad ABB MSMNO name. Confirm the host serial number, option package and engineering drawing.
A seller's equivalent for ABB 1SAM101923R0012 needs explicit engineering approval. Similar labels can conceal different contacts, pitch, voltage, software support, mechanical travel or service scope.
Receiving inspection
When ABB 1SAM101923R0012 arrives, compare the full marking with the purchase order. Inspect the connector, case, terminals and packaging before the existing component is removed.
Check whether ABB 1SAM101923R0012 is a single component, a maintenance kit or an assembly. Record included accessories and any missing pieces before the maintenance window begins.
Safe installation route
Work on ABB 1SAM101923R0012 only under the site's isolation, stored-energy and permit procedure. For breaker and drive parts, the equipment-specific safety manual controls the job.
Mark the existing ABB 1SAM101923R0012 connections and fitted orientation. Retain parameters or adjustment records where applicable, and keep removed parts for comparison until function is proved.
Functional acceptance
After fitting ABB 1SAM101923R0012, check ON/OFF travel, lockout and door interaction. Observe the intended operating states and the alarm or diagnostic path using an approved test method.
If ABB 1SAM101923R0012 affects a protection or safety function, demonstrate the permitted fault response as well as normal operation. Record measurements, configuration and witness approval.
Handover to procurement and maintenance
The ABB 1SAM101923R0012 order should state the full designation, quantity, host asset and required delivery condition. Do not shorten it to a family name in a repeat purchase.
Keep the ABB 1SAM101923R0012 label image, manufacturer reference, fitted revision and test result together. That file is the basis for future replacement decisions.
Final release check
Before release, match the installed ABB 1SAM101923R0012 label to the order and sign off its functional test.
Retain the ABB 1SAM101923R0012 comparison and acceptance record for the next service interval.
