Using ABB 1SBL137001R1110 in the correct assembly
This field-service FAQ identifies ABB 1SBL137001R1110 for accurate ordering and for checking the complete installed function.
Verified technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SBL137001R1110 |
| Product family | AF09-30-10-11 |
| Component role | 9 A three-pole AF contactor with one NO auxiliary |
| Exact ABB order code | 1SBL137001R1110 |
| Product series | AF09-30-10-11 |
| AC-3 rating | 9 A at 400 V family designation |
| Main poles | Three |
| Coil | 24–60 V AC, 20–60 V DC for -11 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Use the ABB 1SBL137001R1110 values together with the cited ABB publication and the delivered device marking; option-dependent details require confirmation.
What does this exact code identify?
ABB 1SBL137001R1110 designates 9 A three-pole AF contactor with one NO auxiliary. Quote the whole order code from the installed marking; a family name or similar photograph does not confirm the fitted supply, contact pattern or current window.
The intended ABB 1SBL137001R1110 role is to switch the specified motor or power circuit. Check the host machine and approved drawings before deciding whether this is the correct part.
What is normally supplied separately?
ABB 1SBL137001R1110 may rely on an external overload element, mounting kit, auxiliary block, controller settings or host contactor according to its function. List every required companion article in the purchase order.
Do not assume ABB 1SBL137001R1110 includes a complete starter or a ready-to-use safety function. Confirm terminals, accessories, wiring and the whole assembly before installation.
Which technical limits should be compared?
Compare the ABB 1SBL137001R1110 data table with the site design, including current, voltage, trip class, poles or interface where applicable. Values for a sibling order code are not automatically values for this unit.
For ABB 1SBL137001R1110, verify coil, auxiliary contact and overload selection. If a required characteristic is not documented, request the manufacturer sheet and inspect the delivered nameplate.
What should the technician test?
After isolated installation of ABB 1SBL137001R1110 by qualified personnel, test commanded main and auxiliary contacts. Record test settings, measured values and expected response before returning the circuit to operation.
ABB 1SBL137001R1110 should be tested in normal, commanded and relevant fault or off conditions. Verify feedback signals and interlocks at the system level.
How should a replacement be assessed?
When a supplier suggests another code in place of ABB 1SBL137001R1110, compare the exact series, mounting, dimensions, control supply, load rating, contact pattern and approvals. Get a written technical difference record.
Retain the removed ABB 1SBL137001R1110 and its connection photograph until the replacement has passed the approved functional test. Engineering approval is required for a meaningful change.
What should purchasing keep on file?
Save the ABB 1SBL137001R1110 code, manufacturer reference, accepted configuration and dated as-left photos with the equipment record. This preserves a reliable route for the next procurement cycle.
If ABB 1SBL137001R1110 becomes obsolete, seek an ABB-supported successor or documented equivalent and review all interface differences; do not silently swap an adjacent variant.
Related codes in the same series
The codes below are grouped under ABB 1SBL137001R1110 as same-series references and will not receive separate pages. They may have different coils, contacts, current ranges or revisions; do not treat them as direct substitutes without checking each complete code.
- 1SBL137001R1410
Final field note
Release an ABB 1SBL137001R1110 order after exact-code, duty and companion-part checks have been signed off.
After commissioning ABB 1SBL137001R1110, keep the acceptance results and updated spare record with the asset.
