ABB 1SDA014026R1 host-equipment fit and acceptance
ABB 1SDA014026R1 is the order-code reference for this S6 rotary operating handle. Its function is to provide the specified local operating interface. The common category image is illustrative only; confirm the delivered ABB 1SDA014026R1 by marking and documentation.
Manufacturer identity and key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SDA014026R1 |
| Product family | S6 fixed rotary-handle accessories |
| Component role | S6 rotary operating handle |
| Exact ABB order reference | 1SDA014026R1 |
| ABB product series | S6 fixed rotary-handle accessories |
| ABB order code | 1SDA014026R1 |
| ABB manufacturer designation | ROT. HANDLE S6 F |
| Series grouping | S6 fixed rotary-handle accessories |
| Order-code boundary | Compare each complete code; related versions may not be interchangeable |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB 1SDA014026R1 table identifies the manufacturer designation and the series boundary. Do not read an unspecified contact rating, fit dimension or interchangeability claim into the family name.
Decision path before purchase
- Match ABB 1SDA014026R1 to the installed breaker and drawing revision.
- Check S6 fixed construction, shaft position and enclosure fit before approving ABB 1SDA014026R1.
- Compare the full ABB 1SDA014026R1 code with the offered package and the job record.
Why the host matters
The ABB 1SDA014026R1 accessory must be selected as part of the breaker assembly, not as a visually similar loose component. Record the host frame, mounting form and existing control arrangement.
Where ABB 1SDA014026R1 is being substituted, check the original assembly documentation and each changed terminal, voltage, contact or mechanical detail.
Mechanical interface
Check the ABB 1SDA014026R1 fixing position, orientation, travel and protection covers. A change from fixed to withdrawable construction, or from one frame to another, can alter accessory fit.
Before fastening ABB 1SDA014026R1, photograph or record the old position and check the supplied parts against the approved assembly instruction.
Electrical interface
For ABB 1SDA014026R1, trace the relevant coil, contact or operator circuit back to the approved schematic. Verify supply type and voltage only where the ABB designation and host manual support them.
Do not energize ABB 1SDA014026R1 solely because a connector fits. Isolation, stored spring energy and control-circuit interlocks need site-approved treatment.
Receipt and handling
At goods receipt, identify ABB 1SDA014026R1 on the package and component; inspect terminals, molded parts and supplied pieces for damage or mismatch.
Quarantine ABB 1SDA014026R1 if the received code, condition or quantity does not match the purchase request. Keep the discrepancy with the maintenance job record.
Functional acceptance
Once ABB 1SDA014026R1 is fitted, check full travel, status and interlock clearance. Include both normal operation and the relevant inhibited or fault state in the signed test plan.
Record the ABB 1SDA014026R1 order code, host identity, test conditions and observed results before returning the breaker to service.
Installation sequence
After safe isolation, fit ABB 1SDA014026R1 using the applicable ABB breaker instruction and the site's controlled procedure. Recheck conductors, barriers and enclosure clearances.
For ABB 1SDA014026R1, do not treat an unpowered visual fit as proof of an electrically correct release, contact or mechanism.
Future service record
Keep ABB 1SDA014026R1 beside the host breaker asset number and any voltage or pole restrictions in the spare-parts register.
Future ABB 1SDA014026R1 enquiries should quote the complete manufacturer code; a shortened family label is not a safe purchasing specification.
Handover
Keep the ABB 1SDA014026R1 acceptance record with the equipment history.
Request any later ABB 1SDA014026R1 replacement against the complete code and confirmed host.
