How ABB 1SDA051367R1 fits the approved assembly
ABB 1SDA051367R1 is the identified release-connection cable kit for the T1–T3 SOR/UVR cable kits application. The shared product-category image is a reference, not a photograph certifying the exact ABB 1SDA051367R1 configuration.
The ABB 1SDA051367R1 technical table separates manufacturer-stated identity from the installation checks that depend on the particular host device.
Key technical data and selection notes
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SDA051367R1 |
| Product family | T1–T3 SOR/UVR cable kits |
| Component role | release-connection cable kit |
| Exact ABB order reference | 1SDA051367R1 |
| ABB product series | T1–T3 SOR/UVR cable kits |
| ABB order code | 1SDA051367R1 |
| Manufacturer designation | KIT 2 CABLES L=2M SOR-UVR T1-T2-T3 |
| Kit | Two cables |
| Listed length | 2 m |
| Host | T1–T3 SOR/UVR application |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
At-a-glance procurement checks
- Confirm the complete ABB 1SDA051367R1 order code and package marking.
- Match ABB 1SDA051367R1 to the host, drawings and approved accessory position.
- Record the required electrical or mechanical limits before fitting ABB 1SDA051367R1.
Installed-system role
ABB 1SDA051367R1 is intended to connect the approved release circuit. Identify its place in the circuit before comparing visually similar accessories.
A manufacturer family prefix does not prove that ABB 1SDA051367R1 has the same contact count, supply, pole arrangement or software interface as another listed option.
Compatibility evidence
For ABB 1SDA051367R1, check release type, breaker frame, routing and connector. Retain the host label, order code and drawing revision used for the decision.
If a substitute is proposed for ABB 1SDA051367R1, require a documented comparison of every changed terminal, rating, supplied piece and approved host.
Receiving and storage
When ABB 1SDA051367R1 arrives, compare the carton, device marking and purchase record. Inspect terminals, release mechanisms, molded parts and accessory contents as applicable.
Keep ABB 1SDA051367R1 isolated from usable stock if its code or condition differs. Resolve the discrepancy before the scheduled shutdown.
Safe installation
Isolate and verify all applicable energy sources before installing ABB 1SDA051367R1. Follow ABB and site requirements for lockout, stored energy and breaker operating springs.
Record wiring and orientation before removing the old unit. Install ABB 1SDA051367R1 with the approved mounting and recheck protective covers and clearances.
Commissioning record
After installing ABB 1SDA051367R1, prove cable continuity and release response. Test normal operation and the relevant inhibited or fault state under an authorized procedure.
Archive ABB 1SDA051367R1 as-left identity, settings, results and sign-off. An indicator or mechanical fit alone does not establish full circuit acceptance.
Future purchase boundary
Keep ABB 1SDA051367R1 and its exact host in the maintenance register. Include any pole, voltage, feature or option restriction beside the stock record.
For later ABB 1SDA051367R1 enquiries, use the full code and verified installation evidence rather than a shortened series name.
Procurement handover
State ABB 1SDA051367R1, quantity and host equipment on the purchase request.
File the ABB 1SDA051367R1 delivery identity and acceptance test in the equipment history.
