Where ABB 1SFA611100R2001 belongs in the assembly

The ABB 1SFA611100R2001 designation points to red momentary flush pushbutton with chrome-look bezel. This brief records the critical ordering and field checks for that exact article.

Technical data and selection limits

Read the ABB 1SFA611100R2001 values with the cited manufacturer publication and delivered marking; option-dependent ratings require confirmation at the site.

Position in the system

ABB 1SFA611100R2001 is specified to match a chrome-finish panel operator in the approved circuit. Identify its physical location and functional purpose on the as-built drawing before treating any replacement as equivalent.

When buying ABB 1SFA611100R2001, state the connected equipment, quantity and the reason for replacement. The short family label alone does not establish the required option or mounting fit.

What the order must contain

Use the complete ABB 1SFA611100R2001 marking on the purchase request. Compare the delivered label with the approved bill of materials and retain photographs of any suffix, approval or revision.

For ABB 1SFA611100R2001, check bezel finish, button color, holder and contact configuration. Where the surrounding assembly is safety-related, a qualified site engineer must approve the assembled function, not merely the appearance of the part.

Interface inventory

List every ABB 1SFA611100R2001 mechanical and electrical interface: mounting, terminal, supply, contact arrangement, communication setting or fuse arrangement as applicable.

A visually similar part may not fit the ABB 1SFA611100R2001 role. Record the relevant circuit values and dimensions, then resolve mismatches before an outage window is booked.

Work package

Before ABB 1SFA611100R2001 is removed or installed, follow the site's isolation and stored-energy procedure. Preserve the original wiring map, configuration file or fuse selection evidence where applicable.

Label ABB 1SFA611100R2001 connections, protect exposed terminals and keep the removed component until the acceptance record confirms correct operation.

Receipt inspection

At receipt, inspect ABB 1SFA611100R2001 packaging and the exact manufacturer code. Confirm supplied accessories, contact or light blocks, terminal base, license and mounting parts where they are separately ordered.

If ABB 1SFA611100R2001 arrives with a different finish, voltage, operator behavior or frame size, hold it for engineering review; do not infer a valid substitution from a similar photograph.

Commissioning evidence

After fitting ABB 1SFA611100R2001, verify manual return and the circuit response. Record the test conditions and the observed results against the approved design.

The ABB 1SFA611100R2001 acceptance record should cover both normal operation and a controlled fault or off-state where relevant. Return the asset to service only after the responsible person signs off.

Future spare decision

File the ABB 1SFA611100R2001 product identity, installation photo and verified tests with the equipment record so the next buyer can reproduce this decision.

When the ABB 1SFA611100R2001 family is updated, ask the supplier to identify the revised order code and document differences in fit, voltage, contacts, software and approvals.

Other codes in this product position

These codes are grouped with ABB 1SFA611100R2001 as same-series enquiry references only. They can differ in size, voltage, color, contacts or hardware generation, so they are not automatically interchangeable.

• 1SFA611100R2002
• 1SFA611100R2003
• 1SFA611100R2006

Release note

Confirm the complete ABB 1SFA611100R2001 code, host fit and accepted functional test before closing the purchase or maintenance job.

Retain the ABB 1SFA611100R2001 manufacturer reference and final as-left record with the asset.