Application boundary for ABB 1SNA165111R1400

ABB 1SNA165111R1400 is the exact order reference for M35/16.P ground terminal block in the SNA M-series protective-earth terminals family. Its intended job is to terminate protective-earth conductors on the correct rail. Select it against the installed asset rather than a code prefix or a similar-looking component.

The shared ABB category image is only a visual reference, not a verified photograph of the exact ABB 1SNA165111R1400. Confirm the label, full suffix and manufacturer's drawing before procurement.

Technical data to place on the purchase record

The ABB 1SNA165111R1400 data above identifies the cited variant. Where a related item differs in rating, interface, mechanical position or supplied accessories, the value shown for ABB 1SNA165111R1400 must not be transferred to that other code.

Electrical or mechanical interface

The connection around ABB 1SNA165111R1400 may include a rail, connector, pinion, gland, conductor or control circuit. Record its size, orientation and installation constraints.

Match the ABB 1SNA165111R1400 interface to the field drawing. Unexpected terminal numbers, colour, physical length or protection option are reasons to pause installation and confirm the complete article.

Selection gates

For ABB 1SNA165111R1400, compare conductor size, rail profile and bonding path. Review the complete nameplate and ABB service record, including ratings that a short catalog description may not show.

If a supplier proposes another code in place of ABB 1SNA165111R1400, require a written equivalence decision for each gate. Similar catalog names alone do not prove safe interchangeability.

Where the part belongs

Locate ABB 1SNA165111R1400 in the specific panel, robot or measurement system. Document the host's designation and serial or drawing reference. The application is to terminate protective-earth conductors on the correct rail.

An ABB 1SNA165111R1400 request without the host identity can select the correct-looking family yet the wrong version. Record the installed mounting and mating parts before a quote is approved.

Failure evidence and spare strategy

Before replacing ABB 1SNA165111R1400, capture the fault symptom, alarm history and as-found condition. Check upstream supply, downstream wiring and surrounding mechanism as relevant.

Keep ABB 1SNA165111R1400 as a controlled spare tied to its host and revision. A failed surrounding assembly can make an undamaged replacement appear defective if the original fault remains.

Acceptance evidence

After installing ABB 1SNA165111R1400, verify continuity and conductor retention. Record measurements and test states, including the host's normal, fault and inhibited responses where applicable.

Release the equipment only when ABB 1SNA165111R1400 and its connected system pass the site acceptance plan. Retain the as-left code, settings and observations for the next maintenance event.

Receipt and fitting

Inspect the delivered ABB 1SNA165111R1400 marking, condition and package contents against the purchase record. Isolate and secure the host following the manufacturer's procedure before handling it.

During ABB 1SNA165111R1400 installation, preserve wiring identification, mechanical clearances, earthing and any required calibration or configuration. Do not infer a replacement route from visual similarity.

Commercial clarification

Quote ABB 1SNA165111R1400 exactly and specify quantity, destination asset, delivery condition and documentation required. Ask for the precise article, not a generic series label.

For ABB 1SNA165111R1400, obtain confirmation of any end-of-life status, replacement code or missing accessory before issuing the purchase order. Preserve that decision with the asset record.

Other configurations represented on this page

The following codes are grouped with ABB 1SNA165111R1400 by the stated concrete series. They will not receive separate pages. Their different ratings, physical roles or accessories still require individual order confirmation; they are not automatically interchangeable.

• 1SNA165113R1600
• 1SNA165115R1000
• 1SNA165130R2300

Information to send with the enquiry

Send ABB 1SNA165111R1400, the asset identifier, a readable installed label and the technical selection gates to the supplier. Ask for the exact supplied code and any explicit deviation.

File the ABB 1SNA165111R1400 approval and commissioning results with the plant spare-parts record.