ABB 2CCG001224R0001 technical selection record

ABB 2CCG001224R0001 is the representative reference for the S800P high-performance MCB series. Its decision starts with the intended duty: protect a high-demand low-voltage circuit. The technical values below identify this representative, not every series variant.

Technical reference for the representative

Use the delivered ABB 2CCG001224R0001 marking and current manufacturer documentation to confirm all limits and options before engineering approval.

Decision 1 — identify the actual function

For ABB 2CCG001224R0001, document the existing device's job, connected circuit and expected behavior. The S800P miniature circuit breaker description helps browsing, but does not prove interchangeability.

Check whether ABB 2CCG001224R0001 is a direct maintenance replacement or part of a revised design. Treat any changed function as an engineering decision.

Decision 3 — document procurement boundaries

Quote ABB 2CCG001224R0001 with its complete designation and the approved series, function and application. Ask suppliers to identify every proposed change to current rating, options, firmware or accessories.

Keep ABB 2CCG001224R0001 separate from apparently similar products in another ABB series. Cross-series pairing requires explicit manufacturer compatibility evidence.

Decision 5 — commission and retain evidence

Install ABB 2CCG001224R0001 only under the approved isolation and commissioning procedure, then verify trip setting and circuit documentation. Record observed results against the design intent.

Store the ABB 2CCG001224R0001 test record with the asset tag, drawing revision and order history so a later technician can verify the exact configuration.

Decision 2 — compare electrical and mechanical interfaces

Before specifying ABB 2CCG001224R0001, verify trip curve, fault level, poles and terminal fit. Compare drawings and the real installation, including terminals, clearances, mounting and the relevant supply.

The ABB S800P high-performance MCB family contains order references with possible differences. For ABB 2CCG001224R0001, a matching series name is insufficient without a full rating and connection check.

Decision 6 — plan a future replacement

A later replacement of ABB 2CCG001224R0001 must be checked again for series, interfaces, ratings and approvals. The related references below are useful for enquiry, not automatic substitutes.

If ABB 2CCG001224R0001 is unavailable, request a written comparison and repeat acceptance testing for any proposed alternate code.

Decision 4 — receive and inspect

When ABB 2CCG001224R0001 arrives, compare the nameplate and order code with the purchase record. Check housing, connectors and supplied accessories for damage or omissions.

Place ABB 2CCG001224R0001 on hold if the delivered marking differs from the accepted specification. Resolve the difference before installation.

Other order references in this ABB series

The following references are grouped under ABB 2CCG001224R0001 because they belong to the same concrete ABB series. They are not interchangeable by default; verify each requested variant's function, rating, approvals and connections. No separate product page is planned for these listed references.

• 2CCG001229R0001
• 2CCG001230R0001
• 2CCG001233R0001
• 2CCG001234R0001
• 2CCG001235R0001
• 2CCG001237R0001
• 2CCG001254R0001

Release criterion

Approve ABB 2CCG001224R0001 after the identity, duty, interface and site test all agree with the approved specification.

Keep ABB 2CCG001224R0001 and its exact order reference on the final equipment record; series grouping is for navigation and selection review.