Using ABB 2CDS200936R0001 in the right circuit
This practical Q&A explains where ABB 2CDS200936R0001 fits, what must be checked and how to retain an auditable product selection.
Technical data for the exact order code
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 2CDS200936R0001 |
| Product family | S2C-H11L |
| Component role | 1NO+1NC auxiliary contact accessory |
| Exact ABB order code | 2CDS200936R0001 |
| ABB catalog type | S2C-H11L |
| Contacts | 1 NO + 1 NC |
| Representative mounting | Left side |
| Related variant | Right-side S2C-H6-11R needs separate fit check |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
For ABB 2CDS200936R0001, confirm any version-dependent value from its ABB source and delivered marking before use.
When does this configuration fit?
Use ABB 2CDS200936R0001 where the designed task is to indicate breaker contact position. Define both the normal state and the protective or off state before selection.
Check ABB 2CDS200936R0001 against left/right mounting and auxiliary wiring. Ratings and mechanical interfaces must match the installed circuit, not just the catalog family name.
What is the exact component?
ABB 2CDS200936R0001 is the full purchase identity for this 1NO+1NC auxiliary contact accessory. Confirm the complete code on the delivered marking and the approved parts drawing.
The shared image for ABB 2CDS200936R0001 illustrates the product family only. It cannot confirm the precise current, contact, key, voltage or terminal configuration.
What would a mismatch cause?
If ABB 2CDS200936R0001 has the wrong current, coil, curve, residual-current type or contact logic, the equipment may not behave as intended. Review the failure mode before substitution.
Do not treat a related ABB 2CDS200936R0001 family code as automatically interchangeable. Preserve the exact configuration and test evidence.
What does it connect to?
Trace ABB 2CDS200936R0001 into the rest of the assembly: power path, control supply, host breaker, socket, controller or terminal block as applicable. Record each mating part.
For ABB 2CDS200936R0001, inspect mounting clearance, wiring diagrams and permitted accessories. A visually similar version may connect differently.
What goes on the purchase record?
Specify ABB 2CDS200936R0001 in full, with its ABB reference, required companions and any approved replacement decision. Review availability and lifecycle status for the order date.
A complete ABB 2CDS200936R0001 record prevents a later maintenance team from selecting a superficially similar variant with a different function.
How is acceptance demonstrated?
Commission ABB 2CDS200936R0001 using the equipment's approved procedure and qualified personnel. Test the commanded operation, return state and any alarm or safety signal.
Specifically for ABB 2CDS200936R0001, prove NO and NC transition. Keep the measured or observed result with the asset record.
Same-series order codes listed here
These ABB codes are related to ABB 2CDS200936R0001 and are covered on this page, not as separate products. Their ratings, electrical options and dimensions can differ.
- 2CDS200946R0001
Record the outcome
Accept ABB 2CDS200936R0001 only when exact identity, intended duty, companion parts and operating checks agree.
File the ABB 2CDS200936R0001 test outcome and manufacturer reference with the as-built documentation.
