Technical fit and buyer decisions for ABB 2CDS271334R0164
ABB 2CDS271334R0164 is a specific article within ST201M miniature breakers. The image is a shared category reference and may not show this exact ABB 2CDS271334R0164 revision.
The table separates the confirmed ABB 2CDS271334R0164 identification from values that must be checked against the installed equipment. Use the complete order code for purchasing and compatibility decisions.
Key technical data and selection points
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 2CDS271334R0164 |
| Product family | ST201M miniature breakers |
| Component role | ST201M-C16 one-pole breaker |
| Exact ABB order reference | 2CDS271334R0164 |
| ABB product series | ST201M miniature breakers |
| ABB type | ST201M-C16 |
| Poles | 1 |
| Characteristic | C curve |
| Current | 16 A |
| Breaking capacity | 10 kA in ABB product description |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Which installed device is being replaced?
Identify the host and duty before ordering ABB 2CDS271334R0164. This article is ST201M-C16 one-pole breaker in the ST201M miniature breakers family. Its purpose is to protect the nominated single-pole circuit.
Record the installed ABB 2CDS271334R0164 label, cabinet tag and location. A matching-looking part from another frame, voltage or pole configuration is not an approved replacement.
Will the interfaces fit?
Compare ABB 2CDS271334R0164 terminals, mounting, enclosure clearances and accessory interfaces with the installed assembly. Include drawings or photographs showing the connection side.
For a proposed ABB 2CDS271334R0164 alternative, request a written comparison of the affected electrical and mechanical interfaces rather than relying on a similar family name.
Which electrical limits matter?
For ABB 2CDS271334R0164, check rated current, C-curve fit, fault level and terminal arrangement. Use the manufacturer's data for the complete designation and the circuit's actual operating and fault conditions.
Do not copy a value from a different ABB 2CDS271334R0164 family member. Current, voltage, release or contact function can change across the related order codes listed below.
What must the installer preserve?
Before touching ABB 2CDS271334R0164, isolate the equipment and follow the applicable ABB and site safety procedures. Record conductor positions, settings and accessory relationships.
Mount ABB 2CDS271334R0164 with the specified hardware and clearances. Recheck torque, insulation, polarity, interlocks and protective barriers relevant to this part.
What should arrive from the supplier?
The ABB 2CDS271334R0164 purchase line should state the exact order code, quantity and host equipment. Inspect packaging, manufacturer marking, suffix, included parts and shipping condition on receipt.
If the delivered ABB 2CDS271334R0164 differs from the approved description, hold it for clarification. Do not install a nominally equivalent article without an engineering check.
How is the result accepted?
After fitting ABB 2CDS271334R0164, confirm operation and circuit identification. Capture the measurements and functional response required by the site's commissioning procedure.
Keep the ABB 2CDS271334R0164 as-left code, settings, test result and approver with the asset record. A successful physical fit alone is not commissioning evidence.
What should future buyers know?
Store ABB 2CDS271334R0164 by complete code and compatible host rather than by a short nickname. The documented release, frame or accessory variant may matter at the next outage.
Send the full ABB 2CDS271334R0164 identity and circuit requirements with future enquiries. The related codes below share a family but are not automatically interchangeable.
Enquiry and handover
For ABB 2CDS271334R0164, include the circuit or machine reference, required quantity and technical limits in the enquiry.
File the ABB 2CDS271334R0164 selection notes and acceptance record with the equipment documentation.
