ABB 2CKA006330A0043 service handover and specification

ABB 2CKA006330A0043 is the representative identifier for Tenton KNX room control elements. The procurement and maintenance notes below describe its documented role as a six-button Tenton room control element, followed by the checks required before it is used at a real site.

Verified technical data

These ABB 2CKA006330A0043 values apply to the representative only. A related code can change voltage, contacts, dimensions, protocol, approval or rated duty; read its own label before substitution.

Order review

For ABB 2CKA006330A0043, the purchasing description needs the complete order reference and the relevant configuration. Check button assignment, ETS application and mounting box. Request written clarification whenever a quoted alternative differs in suffix, revision, frame or accessory set.

The buyer should keep ABB 2CKA006330A0043 separate from service kits and companion accessories. Confirm quantity, mounting hardware, connection method and any software or configuration deliverable before issuing the order.

Service request

The work request for ABB 2CKA006330A0043 should state the failed function, the existing nameplate and the asset location. The intended application is to give occupants local KNX room commands. Record the actual circuit or control point so the replacement decision is tied to a specific duty, not to a visual resemblance.

If ABB 2CKA006330A0043 is proposed as a replacement, capture the former unit's complete designation and compare the functions that matter to the operating plant. A family match narrows the search but does not by itself authorize interchange.

Incoming inspection

When ABB 2CKA006330A0043 arrives, compare the box, device marking and paperwork with the purchase order. Look for shipping damage, missing parts, changed terminal layout or a different revision. Isolate a discrepant item until engineering resolves it.

Photograph the ABB 2CKA006330A0043 marking and preserve its traceability. A shared reference image on a website is not proof that a particular delivered unit has the same electrical rating or options.

Fit and interface

Before ABB 2CKA006330A0043 is installed, compare mechanical dimensions, panel opening or rack position, terminal arrangement, wiring diagram and environmental limits. On a networked product, include the addressing and software dependency review.

For ABB 2CKA006330A0043, document the power supply, connected load or instrument signal at the real interface. Any safety or protection function needs the approved design calculation and competent review.

Next maintenance cycle

Retain the final ABB 2CKA006330A0043 order code, drawings, settings and acceptance results with the asset history. This lets the next team distinguish an approved replacement from a superficially similar variant.

If ABB 2CKA006330A0043 later becomes unavailable, reassess the Tenton KNX room control elements alternatives against the same service request. Do not assume that the next code in a catalog is a drop-in substitute.

Commissioning record

Qualified personnel should install ABB 2CKA006330A0043 under the site's isolation and permit procedure. After wiring or assembly, test every programmed button and feedback. Record the test conditions, result and any setting changed from the approved baseline.

The release to service for ABB 2CKA006330A0043 requires a successful functional test of the complete circuit, not just a powered indicator. Resolve unexpected alarms, communications or mechanical behavior before handover.

Handover condition

Accept ABB 2CKA006330A0043 only when the exact identity, installation interface and test record all agree.

Keep the approved ABB 2CKA006330A0043 documentation with the equipment record for later troubleshooting and purchasing.