ABB 2CMA193506R1000 field-matching guide

ABB 2CMA193506R1000 is treated here as the exact field reference within 316-P6 industrial plugs. This dossier is organized around interface evidence: what the installed item touches, which ratings must match, and how the result is accepted. The full designation matters; shared appearance is not proof of interchangeability.

Key technical data

For ABB 2CMA193506R1000, read the values above together with the physical nameplate and the latest manufacturer instructions. A family description does not establish every optional feature of a particular shipped unit.

Outgoing interface

Follow the path leaving ABB 2CMA193506R1000 to the load, controller or next panel device. Compare terminal assignment, conductor preparation, feedback and accessible clearances.

Changes downstream of ABB 2CMA193506R1000 can invalidate an otherwise plausible substitution. Resolve the complete connected function with the responsible engineer.

Incoming interface

Trace the incoming electrical, mechanical or signal interface to ABB 2CMA193506R1000. Record supply characteristics, installation position, termination and any required upstream isolation.

A purchase for ABB 2CMA193506R1000 should state those incoming conditions explicitly; a matching body size does not prove the input interface is correct.

Application and functional boundary

ABB 2CMA193506R1000 is intended to connect a compatible industrial supply. Identify the circuit, cabinet or process duty in the as-built drawing before selecting a replacement.

The functional boundary of ABB 2CMA193506R1000 includes connected devices and control logic. Note which neighboring components rely on its state, output or protective function.

Designation and option review

For ABB 2CMA193506R1000, compare pin configuration, current, voltage clock position and IP rating. Review every suffix and mechanical option on both the old label and proposed replacement.

If a supplier proposes a variation of ABB 2CMA193506R1000, request a written difference list covering electrical ratings, physical fit, approvals and service impact.

Commissioning evidence

After installing ABB 2CMA193506R1000, check mating connector and protective earth. Include the connected system in the acceptance test rather than checking only the loose component.

Record the ABB 2CMA193506R1000 as-left settings, measurements, test method and reviewer. Do not release equipment when unresolved alarms or interface mismatches remain.

Engineering hold points

Place ABB 2CMA193506R1000 on hold if its label, order confirmation or dimensions disagree with the approved drawing. Capture photographs and the exact discrepancy before releasing stock.

An ABB 2CMA193506R1000 hold is particularly important where a changed release, connector, enclosure or calibration would affect a safety or process function.

Receiving and installation

Receive ABB 2CMA193506R1000 against the complete order string and inspect its markings, terminals, accessories and packaging. Keep revision information with the asset record.

Install ABB 2CMA193506R1000 only under the site's permit and isolation procedures. Use the manufacturer mounting and wiring instructions for the actual configuration.

Future spares decision

Archive the ABB 2CMA193506R1000 approval, supplier documentation and installation drawing together. That record allows a later buyer to distinguish an approved supersession from a merely similar code.

When the next ABB 2CMA193506R1000 spare is requested, recheck duty, firmware or approval changes against the current equipment rather than relying on a historic price line.

Decision record

Release ABB 2CMA193506R1000 only when the full designation, site fit and acceptance result agree.

Keep the ABB 2CMA193506R1000 manufacturer reference, inspection and commissioning evidence with the equipment file.