ABB 2CPX010203R9999 technical selection record
ABB 2CPX010203R9999 is the representative reference for the TwinLine TW205G series. Its decision starts with the intended duty: house a low-voltage distribution assembly. The technical values below identify this representative, not every series variant.
Technical reference for the representative
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 2CPX010203R9999 |
| Product family | TwinLine TW205G |
| Component role | wall-mounted distribution cabinet |
| Exact ABB order reference | 2CPX010203R9999 |
| ABB product series | TwinLine TW205G |
| ABB type | TW205G |
| Enclosure | TwinLine wall cabinet; IP55 catalog description |
| Size | H800 × W550 × D350 mm catalog reference |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Use the delivered ABB 2CPX010203R9999 marking and current manufacturer documentation to confirm all limits and options before engineering approval.
Decision 2 — compare electrical and mechanical interfaces
Before specifying ABB 2CPX010203R9999, verify mounting surface, entries, heat and internal equipment. Compare drawings and the real installation, including terminals, clearances, mounting and the relevant supply.
The ABB TwinLine TW205G family contains order references with possible differences. For ABB 2CPX010203R9999, a matching series name is insufficient without a full rating and connection check.
Decision 1 — identify the actual function
For ABB 2CPX010203R9999, document the existing device's job, connected circuit and expected behavior. The wall-mounted distribution cabinet description helps browsing, but does not prove interchangeability.
Check whether ABB 2CPX010203R9999 is a direct maintenance replacement or part of a revised design. Treat any changed function as an engineering decision.
Decision 4 — receive and inspect
When ABB 2CPX010203R9999 arrives, compare the nameplate and order code with the purchase record. Check housing, connectors and supplied accessories for damage or omissions.
Place ABB 2CPX010203R9999 on hold if the delivered marking differs from the accepted specification. Resolve the difference before installation.
Decision 3 — document procurement boundaries
Quote ABB 2CPX010203R9999 with its complete designation and the approved series, function and application. Ask suppliers to identify every proposed change to current rating, options, firmware or accessories.
Keep ABB 2CPX010203R9999 separate from apparently similar products in another ABB series. Cross-series pairing requires explicit manufacturer compatibility evidence.
Decision 6 — plan a future replacement
A later replacement of ABB 2CPX010203R9999 must be checked again for series, interfaces, ratings and approvals. The related references below are useful for enquiry, not automatic substitutes.
If ABB 2CPX010203R9999 is unavailable, request a written comparison and repeat acceptance testing for any proposed alternate code.
Decision 5 — commission and retain evidence
Install ABB 2CPX010203R9999 only under the approved isolation and commissioning procedure, then inspect closure, earthing and enclosure integrity. Record observed results against the design intent.
Store the ABB 2CPX010203R9999 test record with the asset tag, drawing revision and order history so a later technician can verify the exact configuration.
Release criterion
Approve ABB 2CPX010203R9999 after the identity, duty, interface and site test all agree with the approved specification.
Keep ABB 2CPX010203R9999 and its exact order reference on the final equipment record; series grouping is for navigation and selection review.
