Identification and application of ABB 2CPX046002R9999

ABB 2CPX046002R9999 is the full order identity for this cabinet mounting screw. It serves TriLine RZ13P20 cabinet screws and is intended to secure the approved TriLine cabinet part. The category image is a reference view only; the delivered ABB 2CPX046002R9999 label, hardware and host documentation determine the exact configuration.

Manufacturer data and field limits

For ABB 2CPX046002R9999, distinguish the official manufacturer description from checks required at the installation. A source that identifies only a spare-part type does not establish its voltage, current, dimensions or approvals for every host; confirm those on the marked item and the relevant equipment manual.

Product boundary

Use ABB 2CPX046002R9999 only in the assembly position for which it was specified. Note the plant equipment tag, approved drawing number and the removed component's complete designation.

A name that resembles ABB 2CPX046002R9999 does not make another part compatible. The decisive comparison is RZ13P20 M6 × 12 mm Torx T30 and mounting location, and differences should be referred to the responsible engineer.

Procurement evidence

Record ABB 2CPX046002R9999 exactly on the enquiry and purchase order, along with the host equipment, quantity and required accessories. Check whether the official product text describes a finished item, subassembly or kit.

For ABB 2CPX046002R9999, ask the supplier to confirm the marked delivered version. Packaging photographs and a category image are useful for orientation but cannot replace the complete order code.

Interface map

Trace where ABB 2CPX046002R9999 connects electrically and mechanically. Compare terminals, fasteners, connector keys, clearances and protective coordination with the current equipment drawing.

ABB lists this sunk screw for rear or side walls and busbar carriers. Capture any software, control-voltage or environmental requirement affecting ABB 2CPX046002R9999 before releasing work.

Pre-installation hold point

Before installing ABB 2CPX046002R9999, apply the authorized lockout, isolation and stored-energy procedure. Qualified personnel should review the host manual and site-specific hazards.

Inspect ABB 2CPX046002R9999 for damage, revision differences and missing accessories. A mismatch should remain on hold until it is resolved; do not force a mechanical fit or bypass an interlock.

Commissioning evidence

Install ABB 2CPX046002R9999 to the approved drawing and then confirm secure fastening without damaging the profile. Record observed behavior, settings and measured values that the site procedure requires.

For ABB 2CPX046002R9999, include both normal operation and a relevant alarm, isolated or alternate state. A successful power-on indication by itself does not prove the full function.

Service continuity

Retain the ABB 2CPX046002R9999 code, delivery information, equipment tag and acceptance record together. This supports a future replacement without guessing from appearance.

When ABB 2CPX046002R9999 is ordered again, include the verified host version and any matched companion parts. Keep evidence of a formally approved substitution separate from ordinary related-model references.

Variant decision

The TriLine RZ13P20 cabinet screws family can contain size, voltage, pole-count or connector variants. ABB 2CPX046002R9999 is the representative code for this page, not a universal substitute for every variant.

Compare each related ABB 2CPX046002R9999 family code with its own official designation. Functional or physical differences can make two similar codes unsuitable for the same position.

Final identification

Use ABB 2CPX046002R9999 in full on the receiving and maintenance record.

Archive the ABB 2CPX046002R9999 installation and functional result with the equipment history.