Configuration guide for ABB 2CSM295563R1341

ABB 2CSM295563R1341 is the representative purchasing reference for T1 twilight light switches. Start by checking the installed duty and full designation. A code grouped on this page may have a different rating or function and is not automatically interchangeable.

Verified technical parameters

For ABB 2CSM295563R1341, the table identifies facts supported by ABB technical material. Confirm all selectable ratings, approvals and order suffixes against the physical unit before release.

01 | What the item does

ABB 2CSM295563R1341 is specified to switch lighting according to an installed light sensor. Capture the asset tag and the actual connected circuit or process before asking for a quotation.

The operating role of ABB 2CSM295563R1341 should be cross-checked with the drawing and functional description; appearance alone is not sufficient.

02 | Exact-match questions

Before ordering ABB 2CSM295563R1341, compare sensor placement, lux threshold, output load and supply. Preserve the whole designation, including spaces, suffixes and revision information.

When another ABB 2CSM295563R1341 family code is offered, record every changed contact, voltage, mounting, communication or material condition.

03 | Adjacent equipment

Map the upstream supply and the downstream equipment served by ABB 2CSM295563R1341. Review connectors, terminals, panel access, protective earth and accessories as applicable.

ABB 2CSM295563R1341 must fit the complete installation, not just one published nominal value. Ask the responsible engineer to resolve every interface discrepancy.

04 | Commercial check

Request ABB 2CSM295563R1341 with its complete part string, quantity, approved condition and required documentation. Ask the supplier to identify any supersession separately.

Keep the ABB 2CSM295563R1341 quote, label image and manufacturer data together so the receiving team can compare like with like.

05 | Receipt and storage

Inspect ABB 2CSM295563R1341 on arrival for marking, damaged terminals, broken seals and missing companions. Hold ambiguous stock until the engineering owner confirms it.

If ABB 2CSM295563R1341 needs controlled storage, retain its protective packaging and follow the manufacturer's environmental instructions.

06 | Installation boundary

Service work on ABB 2CSM295563R1341 requires the site's isolation, permit and qualification procedures. Record the prior wiring and settings before disturbing the old item.

Fit ABB 2CSM295563R1341 only with the specified mounting hardware and accessories. Do not infer a safe connection from similar catalog photographs.

07 | Acceptance evidence

After fitting ABB 2CSM295563R1341, test dusk and dawn switching. Test the full connected function through normal and fault-relevant states as the site procedure requires.

Document the ABB 2CSM295563R1341 results, as-left configuration and reviewer; an untested replacement should not be released for service.

08 | Future replacement

Archive ABB 2CSM295563R1341 with the drawing revision, manufacturer document and test record. This keeps later stock decisions tied to the actual installation.

Re-evaluate any future ABB 2CSM295563R1341 variant against that record instead of assuming that a common series name guarantees compatibility.

Same-series codes grouped on this page

These ABB 2CSM295563R1341 related codes are covered here and will not get separate product pages. They may differ in rating, fit, controls or function; verify the exact designation before ordering or substitution.

• 2CSM295793R1341

Release checklist

Release ABB 2CSM295563R1341 only after identity, application, fit and acceptance evidence agree.

Retain the ABB 2CSM295563R1341 decision record for the next procurement and maintenance cycle.