Technical selection record for ABB 2CSR272001R1064 (DS202 M AC-C6/0.03)
ABB 2CSR272001R1064 (DS202 M AC-C6/0.03) is the representative order reference for DS202 M residual-current breakers. This page separates verified catalog data from site-specific checks so buyers can specify the correct item for combine overcurrent and residual-current protection.
Technical specification and configuration limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 2CSR272001R1064 (DS202 M AC-C6/0.03) |
| Product family | DS202 M residual-current breakers |
| Component role | two-pole RCBO |
| Exact ABB order reference | 2CSR272001R1064 |
| ABB product series | DS202 M residual-current breakers |
| ABB type | DS202 M AC-C6/0.03 |
| Rated current | 6 A |
| Residual current | 30 mA, AC type |
| Characteristic | C |
| Icn | 10 kA per ABB DS200 datasheet |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table describes ABB 2CSR272001R1064 (DS202 M AC-C6/0.03), not every item in its wider series. Confirm the actual label and the current ABB product documentation for the unit being supplied.
Interface review
Before fitting ABB 2CSR272001R1064 (DS202 M AC-C6/0.03), compare the equipment drawing, terminal numbering, mounting space and connected load with the actual installed plant. Review the application-specific electrical or communications interface and any relevant software configuration.
Do not infer compatibility from a photograph of ABB 2CSR272001R1064 (DS202 M AC-C6/0.03). Mechanical fit, wiring, firmware, thermal conditions and protection coordination may all vary within a nominal series.
Use case and system boundary
The intended duty for ABB 2CSR272001R1064 (DS202 M AC-C6/0.03) is to combine overcurrent and residual-current protection. Define the affected circuit, machine or network and record its normal and fault states. The product should be selected for that actual duty, not merely because the order code resembles an older spare.
For ABB 2CSR272001R1064 (DS202 M AC-C6/0.03), distinguish the functional device from its accessories and from other ratings in DS202 M residual-current breakers. A related catalog reference is a family-navigation aid, not an automatic substitute.
Purchasing specification
Request ABB 2CSR272001R1064 (DS202 M AC-C6/0.03) by complete designation. Add the required supply, current, interface, enclosure, revision and regulatory approvals to the purchase document. Any proposed alternative should be accompanied by a written difference check.
For ABB 2CSR272001R1064 (DS202 M AC-C6/0.03), check circuit voltage, residual type, curve and rated current. Confirm availability and lifecycle status with the supplier, especially when an older assembly or control platform is involved.
Installation and acceptance
Only qualified personnel should install ABB 2CSR272001R1064 (DS202 M AC-C6/0.03) under the approved isolation and safe-work procedure. After correct assembly, perform permitted RCBO test and record result. Test the function that the circuit or process actually relies on.
The commissioning record for ABB 2CSR272001R1064 (DS202 M AC-C6/0.03) should include settings, test conditions, observed responses, drawing revision and approval. If the result differs from expectation, resolve the cause before putting the asset back into service.
Receiving inspection
On arrival, identify ABB 2CSR272001R1064 (DS202 M AC-C6/0.03) from its nameplate, box and order paperwork. Inspect for damage, missing hardware and revision differences. Keep questionable material separate until the engineering team resolves the discrepancy.
Record the full ABB 2CSR272001R1064 (DS202 M AC-C6/0.03) designation against the asset or spare-part register. Preserve the manufacturer's instructions and any configuration record needed for later replacement.
Future maintenance
Store ABB 2CSR272001R1064 (DS202 M AC-C6/0.03) with a traceable part number and the configuration evidence. During future maintenance, compare the installed unit to the approved reference before any order is placed.
If ABB 2CSR272001R1064 (DS202 M AC-C6/0.03) is replaced with another member of DS202 M residual-current breakers, repeat the rating, interface and safety review. Similar family names do not prove equivalence.
Related order references in this ABB series
The following references belong to the concrete DS202 M residual-current breakers range or a directly paired system for ABB 2CSR272001R1064 (DS202 M AC-C6/0.03). Ratings, function and host fit may differ. Each listed reference is covered here and will not receive a separate product page.
- 2CSR272001R1164
Release decision
Approve ABB 2CSR272001R1064 (DS202 M AC-C6/0.03) only after the catalog identity, site interfaces and acceptance checks agree.
Keep the approved ABB 2CSR272001R1064 (DS202 M AC-C6/0.03) record available for the next repair or purchasing cycle.
