ABB 3AUA0000129433 replacement profile
ABB 3AUA0000129433 identifies a drive printed-circuit board for a specific service position. The goal is to restore the specified ZBDR board position. The shared category image is illustrative, so verify the received ABB 3AUA0000129433 against the actual marking and host manual.
Verified part identity and technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3AUA0000129433 |
| Product family | ZBDR-01C PCB spares |
| Component role | drive printed-circuit board |
| Exact ABB order reference | 3AUA0000129433 |
| ABB product series | ZBDR-01C PCB spares |
| ABB order code | 3AUA0000129433 |
| Manufacturer designation | ZBDR-01C |
| ABB description | ZBDR-01C; PCB |
| Board | ZBDR-01C |
| ABB type | PCB |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB 3AUA0000129433 values above come from the named manufacturer description. Where a rating, interface or compatible host is not stated, it must be checked on the installed equipment rather than assumed from a nearby model.
Purchase decision
- Quote the complete ABB 3AUA0000129433 code in the request.
- For ABB 3AUA0000129433, confirm host hardware, board revision and connector arrangement.
- Hold ABB 3AUA0000129433 for clarification if marking, supplied parts or host differ.
What the part changes
ABB 3AUA0000129433 is selected for the documented circuit or maintenance role. Identify the assembly position, system version and expected function before procurement.
A family name alone does not establish that ABB 3AUA0000129433 can replace a neighboring control board, fan, capacitor or power module.
Work authorization and isolation
Qualified personnel must isolate ABB 3AUA0000129433 and the surrounding equipment in accordance with the applicable ABB and site safety instructions. Verify stored energy, DC-link discharge and earthing where relevant.
This ABB 3AUA0000129433 page does not define a universal safe waiting time or substitute for the equipment-specific maintenance manual.
Evidence from the installed unit
Record the ABB 3AUA0000129433 host label, as-found part marking, connections and any relevant software or parameter backup. Keep the drawing revision beside this evidence.
If ABB 3AUA0000129433 is a replacement, compare old and new connector keying, rating text and supplied kit contents before removing the old part.
Fitting the correct version
Check host hardware, board revision and connector arrangement for ABB 3AUA0000129433. Confirm orientation, mounting, protective barriers, cable routing and cooling path before energization.
Where ABB 3AUA0000129433 has a programmed or frame-specific variant, match that version explicitly rather than using a visual fit as approval.
Receiving and stock control
At receipt, compare ABB 3AUA0000129433, package quantity and physical condition with the purchase order. Segregate mismatched or damaged parts.
Keep ABB 3AUA0000129433 indexed by the complete code, confirmed host and service position so that later purchases do not rely on a shortened family label.
Commissioning proof
After ABB 3AUA0000129433 is installed, verify all documented board functions. Observe relevant alarms, feedback and inhibited states under an approved test plan.
Save the ABB 3AUA0000129433 test conditions and outcome with the equipment record; a successful power-up alone is not full acceptance.
Future replacement note
When ABB 3AUA0000129433 is used again, recheck the current host documentation and any revised part or firmware before approving substitution.
Retain the ABB 3AUA0000129433 acceptance result, installed serial information and revision-specific restrictions for maintenance planning.
Service handover
Keep the ABB 3AUA0000129433 selection and test records with the maintenance job.
Use ABB 3AUA0000129433 as the full order-code keyword in future enquiries.
