Technical fit of ABB 3AXD50000002749 in the installed system
ABB 3AXD50000002749 identifies BGAD-22C 300 A / 1200 V IGBT kit in the BGAD IGBT module kits product group. In the documented application it is used to repair the approved drive power stage. The full code, fitted host and operating duty must agree before this part is bought or installed.
The shared ABB category image represents the equipment class only. It does not certify the exact physical appearance of ABB 3AXD50000002749; use the ABB article label and the installed equipment record for that decision.
Verified technical identity
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 3AXD50000002749 |
| Product family | BGAD IGBT module kits |
| Component role | BGAD-22C 300 A / 1200 V IGBT kit |
| Exact ABB order reference | 3AXD50000002749 |
| ABB product series | BGAD IGBT module kits |
| Representative designation | BGAD-22C / 300 A / 1200 V |
| Function | IGBT power-semiconductor kit |
| Other grouped designs | BGAD-11C, -12C, -13C, -21C, -22C ratings differ |
| Safety boundary | Not interchangeable without drive-frame and voltage matching |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The entries for ABB 3AXD50000002749 distinguish manufacturer-confirmed identity from field selection points. They are not a universal specification for every variant in BGAD IGBT module kits.
Compatibility gate
For ABB 3AXD50000002749, compare current, voltage, gate-driver board, thermal interface and power-stack frame. Confirm both the electrical interface and the mechanical fit from the applicable ABB manual or project drawing.
If a proposed alternative differs from ABB 3AXD50000002749, request a separate written comparison of the differing ratings, pinout, firmware and thermal design before approving it.
Asset and duty
Start an ABB 3AXD50000002749 enquiry with the drive, panel or controller asset number. Define the task: repair the approved drive power stage. The order number by itself does not describe the site wiring or operating stress.
Record the existing ABB 3AXD50000002749 label, assembly location and any option or revision code. Include photographs of the connection side, not only the front face.
Receiving check
Compare the delivered ABB 3AXD50000002749 with the approved purchase line, including suffix, packaging, accessories and board revision. Inspect contacts, pins, casing and evidence of handling damage.
Quarantine ABB 3AXD50000002749 if the ABB marking, documentation or physical interface conflicts with the approved configuration. Do not resolve a mismatch by assuming a common order prefix means a common part.
Circuit boundary
Trace what supplies ABB 3AXD50000002749 and what load or signal leaves it. Mark connectors, fuses, shielding, grounding and cooling paths on the as-built drawing.
A replacement ABB 3AXD50000002749 may be damaged by an unresolved upstream fault. Check the surrounding circuit, including residual energy, before fitting a new spare.
Commissioning evidence
After replacement of ABB 3AXD50000002749, prove insulation and controlled power-stage operation. Check the complete connected system in normal, inhibited and fault conditions as the site procedure requires.
Retain the ABB 3AXD50000002749 as-left identification, parameter backup, measurements and acceptance sign-off. This evidence reduces uncertainty at the next service event.
Installation route
Isolate the equipment, verify absence of hazardous energy and follow the manufacturer service procedure before handling ABB 3AXD50000002749. Record wire positions and settings before removal.
Install ABB 3AXD50000002749 with the specified fasteners, cable routing, ESD controls and cooling clearances. Preserve the original protection and grounding scheme.
Procurement handover
Request ABB 3AXD50000002749 with the exact code, asset tag, quantity and delivery requirements. Ask the supplier to identify any successor article or kit contents explicitly.
Keep the ABB 3AXD50000002749 manufacturer's product record and the plant fit decision together. A supplier quotation is not a substitute for technical compatibility approval.
Codes represented with this series
The following ABB codes are covered with ABB 3AXD50000002749 on this representative page and are not separate product pages. Their ratings, firmware, assembly contents and installation positions may differ; none is an automatic substitute for ABB 3AXD50000002749.
- 3AXD50000013022
- 3AXD50000013035
- 3AXD50000013036
- 3AXD50000013037
- 3AXD50000013038
- 3AXD50000038770
- 3AXD50000038783
- 3AXD50000038787
- 3AXD50000749256
- 3AXD50000749263
- 3AXD50000749270
Order record
State ABB 3AXD50000002749 in the enquiry and include the verified host, part role and required operating limits.
Keep the ABB 3AXD50000002749 receipt and commissioning evidence with the asset history.
