Confirming A185-30-11-80 (1SFL491001R8011) for an installed system
A185-30-11-80 (1SFL491001R8011) is the complete reference for this legacy three-pole A185 motor contactor. Use the exact code, not only the family name, when reviewing a replacement or preparing an enquiry. The final site decision depends on the installed circuit and the marked hardware revision.
Technical identification
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | A185-30-11-80 (1SFL491001R8011) |
| Product family | A185 |
| Component role | legacy three-pole A185 motor contactor |
| Power contacts | 3 normally-open poles |
| Auxiliary | 1 NO + 1 NC for -11 |
| Coil | 220-230 V, 50 Hz / 230-240 V, 60 Hz for -80 |
| Order code | 1SFL491001R8011 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
These A185-30-11-80 (1SFL491001R8011) details establish the selection baseline. Check the unit label and current ABB documentation for any option or approval that is not explicit in the technical table.
What must match?
The critical A185-30-11-80 (1SFL491001R8011) comparison is: Check coil supply, overload relay, terminal fit, interlock design and approved lifecycle replacement options. Confirm each difference with the supplier and the site engineer before approving it.
Document the terminal arrangement, supply, protective coordination or communications mapping relevant to A185-30-11-80 (1SFL491001R8011). An alternative code can require a changed parameter set, mounting layout or approval.
What proves it works?
For A185-30-11-80 (1SFL491001R8011), the acceptance action is: Test coil and contacts, protective trip chain and normal motor start/stop response. Record the actual observed result, not only the power-on indication.
Retain a signed record of the A185-30-11-80 (1SFL491001R8011) test together with faults, corrections and the final nameplate information for later maintenance and procurement.
Duty at this site
For A185-30-11-80 (1SFL491001R8011), the expected duty is: Maintain the specified A185 starter within the installed motor-control circuit. Identify the source, the connected equipment and the permissive or alarm logic before ordering.
A useful handover record for A185-30-11-80 (1SFL491001R8011) includes the drawing reference, ambient condition and the operating duty. This helps distinguish a genuine equivalent from a merely similar-looking device.
Before energizing
Inspect A185-30-11-80 (1SFL491001R8011) and its connected wiring under the approved isolation procedure. Compare the delivered code with the order, then check mechanical seating, terminals and required accessories.
Restore only reviewed settings for A185-30-11-80 (1SFL491001R8011). If the original assembly contains safety or protection functions, follow the plant's dedicated validation plan before operating the load.
Codes grouped with this model
Other A185 codes are listed here for search and procurement reference. Their suffixes may change the coil, ratings, channel layout, interfaces or accessories, so they are not declared interchangeable with A185-30-11-80 (1SFL491001R8011).
- A185-30-11, VOLTAGE: 210/240V, FREQUENCY: 50/60HZ
- A185-30-11-80
- A185-30-11-84
For the purchase enquiry
State the full A185-30-11-80 (1SFL491001R8011) code, installed machine or panel, quantity, required condition and delivery destination. Ask for a matching datasheet and the supplied hardware revision.
If A185-30-11-80 (1SFL491001R8011) is offered as a substitute or updated spare, request a written cross-reference covering mechanical fit, wiring, ratings and required project changes before approval.
