ABB A260-30-11-80 field identification and technical fit
ABB A260-30-11-80 is documented here as an exact equipment reference for selection, changeover and service. Confirm the full label and application before treating another code as equivalent.
Technical data and selection boundary
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | A260-30-11-80 |
| Product family | A260 |
| Component role | A260 three-pole high-current contactor |
| Type | A260-30-11-80 |
| Order code | 1SFL531001R8011 |
| Main contacts | 3 normally open |
| Auxiliaries | 1 NO + 1 NC |
| Coil | 220–230 V 50 Hz / 230–240 V 60 Hz catalog variant |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The verified ABB information for A260-30-11-80 is shown above. Values tied to a series or catalog configuration still need to be checked against the supplied unit and its current documentation.
Asset match
ABB A260-30-11-80 should be matched to a specific asset tag, duty and installed hardware revision. Record why the part is needed and capture a clear nameplate image before requesting an offer.
For A260-30-11-80, the order description is only one checkpoint. The approved drawings and actual installation determine which connection, control and protection details must be retained.
Interfaces to compare
Before ordering A260-30-11-80, verify AC-3 rating, coil, bar terminals and overload coordination. Compare terminals, mount, supply, accessories and revision with the installed unit and current ABB documentation.
An alternative to A260-30-11-80 should not be released until the engineering owner has documented each changed interface and the required approval.
Functional role
Use A260-30-11-80 to switch a large industrial motor or approved power load. Confirm the operational sequence and the equipment connected to it so a superficially similar series member is not accepted as an automatic replacement.
If A260-30-11-80 is part of a safety, motor or process control function, review the complete system response rather than checking the isolated component alone.
Removal and preparation
Prepare the work around A260-30-11-80 using the site's isolation, lockout and permit rules. Save settings, wiring photographs and diagnostics before removing the existing item.
For A260-30-11-80, reserve the necessary panel space, access to terminals and any separately ordered shaft, base, connector or protection accessory.
Commissioning evidence
After installing A260-30-11-80, prove contact and auxiliary response under safe test. Use the manufacturer's procedure and a site-approved test plan; do not energize a connected load simply to identify an unknown variant.
Record the as-left settings, test observations, date and approver for A260-30-11-80. Remove any temporary bypass and restore normal alarms before handover.
Receipt and identification
At receipt, compare the shipped A260-30-11-80 label, suffix, order code and hardware build with the approved purchase request. Inspect for handling damage and missing accessories.
Hold A260-30-11-80 from installation if coil voltage, release, fiber type, contact arrangement or approval differs from the intended specification.
Handover and spares
File the ABB A260-30-11-80 purchase identity with the asset record, drawing revision and maintenance notes. This keeps future enquiries tied to the actual installed configuration.
Monitor A260-30-11-80 during its first operating period for unexpected trips, heating, I/O faults or abnormal switching and resolve deviations through the normal change process.
Same-series reference codes
The following A260 codes can be raised with an ABB A260-30-11-80 enquiry. Different suffixes can change ratings, contacts, approvals or fit; do not assume interchangeability.
No additional unassigned A260 code is grouped with A260-30-11-80 at this time.
Request-for-quote details
Quote ABB A260-30-11-80 exactly, with the asset tag, installed label, required quantity and commissioning constraints. Ask the supplier to state any deviation explicitly.
Keep the final A260-30-11-80 approval and inspection record with the plant spare-parts file.
