ABB ACS143-2K1-3 field identification and technical fit
ABB ACS143-2K1-3 is documented here as an exact equipment reference for selection, changeover and service. Confirm the full label and application before treating another code as equivalent.
Technical data and selection boundary
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | ACS143-2K1-3 |
| Product family | ACS143 |
| Component role | ACS140-family compact AC drive |
| Type code | ACS143-2K1-3 |
| Supply | Three-phase 380–480 V AC family table |
| Motor power | 1.1 kW nominal motor table entry |
| Output current | 2.8 A at 4 kHz nominal table entry |
| Status | Legacy ACS140-family equipment; verify service availability |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The verified ABB information for ACS143-2K1-3 is shown above. Values tied to a series or catalog configuration still need to be checked against the supplied unit and its current documentation.
Asset match
ABB ACS143-2K1-3 should be matched to a specific asset tag, duty and installed hardware revision. Record why the part is needed and capture a clear nameplate image before requesting an offer.
For ACS143-2K1-3, the order description is only one checkpoint. The approved drawings and actual installation determine which connection, control and protection details must be retained.
Interfaces to compare
Before ordering ACS143-2K1-3, verify motor current, supply, braking, control terminals and parameter backup. Compare terminals, mount, supply, accessories and revision with the installed unit and current ABB documentation.
An alternative to ACS143-2K1-3 should not be released until the engineering owner has documented each changed interface and the required approval.
Functional role
Use ACS143-2K1-3 to regulate speed on the approved small motor. Confirm the operational sequence and the equipment connected to it so a superficially similar series member is not accepted as an automatic replacement.
If ACS143-2K1-3 is part of a safety, motor or process control function, review the complete system response rather than checking the isolated component alone.
Removal and preparation
Prepare the work around ACS143-2K1-3 using the site's isolation, lockout and permit rules. Save settings, wiring photographs and diagnostics before removing the existing item.
For ACS143-2K1-3, reserve the necessary panel space, access to terminals and any separately ordered shaft, base, connector or protection accessory.
Commissioning evidence
After installing ACS143-2K1-3, compare speed demand, current and fault response. Use the manufacturer's procedure and a site-approved test plan; do not energize a connected load simply to identify an unknown variant.
Record the as-left settings, test observations, date and approver for ACS143-2K1-3. Remove any temporary bypass and restore normal alarms before handover.
Receipt and identification
At receipt, compare the shipped ACS143-2K1-3 label, suffix, order code and hardware build with the approved purchase request. Inspect for handling damage and missing accessories.
Hold ACS143-2K1-3 from installation if coil voltage, release, fiber type, contact arrangement or approval differs from the intended specification.
Handover and spares
File the ABB ACS143-2K1-3 purchase identity with the asset record, drawing revision and maintenance notes. This keeps future enquiries tied to the actual installed configuration.
Monitor ACS143-2K1-3 during its first operating period for unexpected trips, heating, I/O faults or abnormal switching and resolve deviations through the normal change process.
Same-series reference codes
The following ACS143 codes can be raised with an ABB ACS143-2K1-3 enquiry. Different suffixes can change ratings, contacts, approvals or fit; do not assume interchangeability.
No additional unassigned ACS143 code is grouped with ACS143-2K1-3 at this time.
Request-for-quote details
Quote ABB ACS143-2K1-3 exactly, with the asset tag, installed label, required quantity and commissioning constraints. Ask the supplier to state any deviation explicitly.
Keep the final ACS143-2K1-3 approval and inspection record with the plant spare-parts file.
