Integration notes for ABB ACS800-04M-0490-3
ABB ACS800-04M-0490-3 is identified here by its complete designation. This page helps align the requested item with its site duty, interfaces and commissioning evidence; a family label alone is insufficient for substitution.
Technical data and configuration boundaries
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | ACS800-04M-0490-3 |
| Product family | ACS800-04M |
| Component role | non-preassembled drive module kit |
| Series | ACS800-04M six-pulse drive module kit |
| Supply designation | -3 voltage class for 380/400/415 V systems |
| Enclosure | IP00 module integration |
| Controls | RDCU control arrangement; verify build |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Treat the figures and descriptions for ACS800-04M-0490-3 as verified selection references, then check the specific unit nameplate, official drawing and ordered options before installation.
Interface comparison
Before accepting ACS800-04M-0490-3, compare R7/R8 mechanical build, DC charging, cooling, EMC, protection and RDCU wiring. A difference in an apparently minor suffix can change the installation or communication behavior.
Photograph the existing ACS800-04M-0490-3 nameplate and connections when possible. Keep the comparison with the work order, including any required adapter or accessory.
Where this item fits
The practical purpose of ACS800-04M-0490-3 is to assemble the specified high-power drive into an engineered cabinet. Identify the plant tag, controlled equipment and operating condition so the request describes a real application rather than a generic spare.
For ACS800-04M-0490-3, record whether the work is a planned replacement, a new installation or an emergency stock replenishment. Each route changes the evidence needed before release.
Proof of operation
For the ACS800-04M-0490-3 handover, document cabinet checks and run approved no-load then load tests. Document readings, operator observations and any exceptions before normal service is restored.
Archive the final ACS800-04M-0490-3 configuration, software or hardware revision and acceptance sign-off so future maintenance has a trustworthy baseline.
Risk and installation controls
An installation involving ACS800-04M-0490-3 should follow the site isolation and permit process. Preserve the approved settings, drawings and test records before removing the old device.
Fit ACS800-04M-0490-3 only after the mechanical, electrical and environmental boundaries are understood. Check protective devices and termination torque against the applicable ABB instructions.
Other designations in this family
The following ACS800-04M codes are grouped for search and enquiry with ABB ACS800-04M-0490-3. They may have different ratings, firmware, approvals or accessories and are not automatically interchangeable.
- ACS800-04M-0210-3+E210+H354+J400+K454+L503+Q967+R711
- ACS800-04M-0260-3+E210+H354+H355+J400+K454
- ACS800-04M-0320-5 +E208 +H360 +J400 +K458 +P901 +P916 +P920
- ACS800-04M-0320-5+E208+H360+J400+K458+P901
- ACS800-04M-0320-5+E208+H360+J400+K458+P901+P916+P9
- ACS800-04M-0320-5+E208+H360+J400+K458+P901+P916+P920
- ACS800-04M-0440-3+E210+H354+J400+K454+L503+Q967+R711
- ACS800-04M-0490-3+D150+H354+H355+H356+H362+J400+J413+K454+L508+P901+P904+R711
- ACS800-04M-0610-7+D150+P901
Order and service handoff
State the exact ABB ACS800-04M-0490-3 code, plant tag, critical ratings and required documentation on the enquiry. Request confirmation of revision and accessory scope before dispatch.
On receipt, compare ACS800-04M-0490-3 against the approved request and hold any mismatch for engineering review. Keep the tested configuration with the asset record.
