ABB 68569591 (FS450R17KE3/AGDR-71C S) ACS800 IGBT replacement guide
ABB 68569591 (FS450R17KE3/AGDR-71C S) is the exact ordering identity addressed here. This page identifies the ABB ACS800 IGBT module kit by both its FS designation and ABB order number. The other codes below are ordering references, not declared drop-in replacements. The category image is a shared reference image, not a photograph of the precise delivered configuration.
Key technical and selection data
| Technical item | Verified value / selection note |
|---|---|
| ABB order number | 68569591 |
| ABB part designation | FS450R17KE3/AGDR-71C S |
| Part type | IGBT module kit |
| Manufacturer notice | ABB Oy Drives Service, 3AXD10001699553, revision E |
| Thermal interface | ABB describes a running change to TIM foil; check the delivered kit and current service instructions |
| Host verification | Use the equipment serial number and ABB Drives Installed Base recommended-spares record |
For ABB 68569591 (FS450R17KE3/AGDR-71C S), preserve the complete part designation during enquiry and receipt. The data above distinguish a confirmed item description from site-specific checks; they do not establish a universal replacement rating.
Where this part is used
ABB 68569591 (FS450R17KE3/AGDR-71C S): The kit is used in approved ACS800 EconoPACK+ drive module maintenance. Its precise host position and compatible assembly must be checked against the installed drive and ABB service record. Record the host equipment tag, serial number and current assembly drawing before purchasing a replacement.
The operating position of ABB 68569591 (FS450R17KE3/AGDR-71C S) must be confirmed from the installed system. A similar-looking code or generic product image does not prove electrical, optical or mechanical equivalence.
Ordering and fit decision
For ABB 68569591 (FS450R17KE3/AGDR-71C S), Compare the complete FS and AGDR strings, order number, host module, revision and thermal-interface kit. Do not derive ratings from the abbreviated FS code or assume the listed variants interchange. Capture the full code on the removed part and request confirmation for any proposed alternate.
Before releasing ABB 68569591 (FS450R17KE3/AGDR-71C S) for installation, check whether the delivered item is a standalone part, a kit or a length of material. Ask for the actual package contents and required companion pieces.
Receiving and installation checks
Inspect ABB 68569591 (FS450R17KE3/AGDR-71C S) for transit damage, legible identification and the correct revision. Compare its physical interfaces with the removed part without forcing a fit or changing approved protection.
For ABB 68569591 (FS450R17KE3/AGDR-71C S), Qualified drive-service personnel should isolate and discharge the DC link, follow the approved ESD and semiconductor-handling procedure, install the specified thermal-interface materials, and verify drive diagnostics and operation. Record the observed result and keep the order code with the maintenance history.
Replacement boundaries
ABB 68569591 (FS450R17KE3/AGDR-71C S) should not be selected solely by a partial number. Ratings and compatibility absent from the verified description must be established from the equipment-specific ABB records.
If ABB 68569591 (FS450R17KE3/AGDR-71C S) cannot be matched to the host documentation, hold installation and ask for an exact part-number cross-check. Approval of a substitute should be documented by the responsible engineer.
Other visually related ordering strings
These strings resemble the ABB 68569591 (FS450R17KE3/AGDR-71C S) kit code and are collected here to avoid separate near-duplicate pages. Several designate different IGBT kits, driver combinations or host revisions. They are not declared interchangeable; check each full identity against ABB's recommended-spares record.
- 6MBI450U-170/AGDR-72C
- FS200R12T4 3AUA0000066031F
- FS225R12KE3/AGDR-61C+IGBT P3127E YL
- FS225R12KE3G-AGDR-71C
- FS225R17KE3/AGDR-76C S
- FS300R17KE3/AGDR-76C S
- FS300R17KE3/AGDR-76C S 68569362
- FS450R12KE3/AGDR-71C S Part No. 68569354
- FS450R12KE3G+AGDR-71C
- FS450R17KE3/AGDR-61C S
- FS450R17KE3/AGDR-71C
- FS450R17KE3/AGDR-71C 68444217
- FS450R17KE3/AGDR-71C S, Code: 68569591
- FS450R17KE3/AGDR-72C S 68569427
ABB's ACS800 service notice identifies 68569591, 68569354, 68569362 and 68569427 as separate kit order numbers. The TIM-foil transition was a running change, so receiving checks must follow the current service instruction.
Procurement record
Quote ABB 68569591 (FS450R17KE3/AGDR-71C S) in full, with quantity, host equipment and any installation constraint. Retain the supplier confirmation and final acceptance result.
