Working with AF09-30-01-11: function, limits and field checks
AF09-30-01-11 is the specified three-pole motor contactor. The complete AF09-30-01-11 designation should remain on the purchase request and maintenance record because a shared family name does not prove interchangeability.
Key technical data for identification
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | AF09-30-01-11 |
| Product family | AF09 |
| Component role | three-pole motor contactor |
| Main poles | 3 |
| AC-3 current | 9 A at 400/415 V reference |
| Built-in auxiliary | 1 normally closed |
| Coil | 24 to 60 V AC or 20 to 60 V DC |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
For AF09-30-01-11, the table records documented type-level facts and flags items that still require an exact order-code or nameplate check. Use those checks before approving a substitute.
Fault-isolation route
If the installed AF09-30-01-11 appears faulty, first distinguish a component problem from external wiring, power, field devices or configuration. Confirm coil range, NC auxiliary feedback, motor duty, thermal relay pairing and upstream short-circuit protection.
Record the symptom and the measurement that supports the diagnosis for AF09-30-01-11. Check the relevant drawings and status indications with the machine in a safe condition; avoid replacing a working device to mask a system fault.
Replacement and acceptance
A replacement for AF09-30-01-11 must preserve the documented interfaces and settings. Verify energization, dropout, contact feedback and interlocked motor start/stop behavior.
After work on AF09-30-01-11, record the installed complete code, observed tests, firmware or setting revision where relevant, and the person approving return to service.
Normal operating duty
AF09-30-01-11 is intended for this system duty: Switch a three-phase motor or comparable load in a coordinated starter.
Before selecting AF09-30-01-11, document the actual supply, connected load or signal, operating environment and expected cycle. A similar housing is not evidence of an equal operating envelope.
Other codes in the same series
The codes below belong to the AF09 grouping relevant to AF09-30-01-11. Ratings, interfaces, software, approvals and accessories can differ. They are ordering references, not automatic replacements.
- 1SBL137001R1310, AF09-30-10-13
- 1SBL137201R1300 AF09-40-00-13
- AF09-30-10-11
- AF09-30-10-11 24-60V50/60HZ 20-60VDC
- AF09-30-10-13
- AF09-30-10-13 1SBL137001R1310
- AF09-40-00-13*100-250V AC/DC
Purchase and handover checklist
Request AF09-30-01-11 by its full designation. Provide quantity, current nameplate image, site wiring diagram and any required certificates. Ask the supplier to identify deviations from AF09-30-01-11 explicitly.
Before returning the system containing AF09-30-01-11 to service, confirm protective devices, terminal assignments, control logic and test records. Retain the final identity of AF09-30-01-11 in the asset history.
