AF26-30-00-13: AF26 contactor application note: motor duty, coil supply and auxiliary contacts
ABB AF26-30-00-13 is a three-pole AF contactor with order code 1SBL237001R1300. ABB product data lists a 100–250 V AC/DC electronic coil interface and an AC-3 current reference of 26 A, with 11 kW at 400 V as a motor-duty reference. Final suitability depends on the motor, utilization category, ambient temperature and coordination design.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| ABB order code | 1SBL237001R1300 |
| Type designation | AF26-30-00-13 |
| Main poles | 3-pole, 3 normally open |
| AC-3 operational current | 26 A at 400/415 V class; verify exact operating point |
| AC-3 motor power | 11 kW reference at 400 V |
| Coil control voltage | 100–250 V AC/DC electronic coil interface |
| Main circuit voltage | Up to 690 V AC family limit |
Maintenance handover priorities
For AF26-30-00-13, preserve the baseline configuration before a planned replacement. Photograph the nameplate and wiring, capture settings and software versions, identify the associated circuit or I/O channels, and agree on a functional test that proves the same operating response.
Selection and compatibility checks
For 1SBL237001R1300, confirm AC-3 current at the actual voltage, coil voltage range, auxiliary contact needs, terminal arrangement, enclosure and required accessories. The code suffix matters: other AF26 suffixes can use different coil ranges or contact arrangements. Do not use the frame designation alone to infer equivalence.
For AF26-30-00-13, establish the equipment boundary before procurement: record the host controller or panel, the connected field device, the installed hardware and firmware revisions, the supply source, the protection method and the required operating sequence. A family-name match is not enough to confirm that AF26-30-00-13 is a compatible replacement. Check all interfaces and accessories against the exact ABB documentation.
Commissioning and acceptance
Install AF26-30-00-13 with the circuit isolated and terminals tightened to ABB specifications. Check coil voltage at pickup, contactor operation, mechanical interlocks and overload coordination. Test start/stop logic and verify that the contactor drops out on the intended fault or loss-of-control-power condition.
A practical acceptance record for AF26-30-00-13 should include the nameplate photograph, order code, terminal and connector condition, configuration or setting values, software revision where applicable, test equipment and measured results. If AF26-30-00-13 is installed as part of a larger system, record the system-level response as well as the local device indication.
Related same-series designations
These AF26-30-00-13 references identify related options or configurations, not automatic substitutes. Check each complete model code, ratings, connection method and compatibility before selection.
- 1SBL237001R1300
- 1SBL237001R1300, AF26-30-00-13
- AF26-22-00-13
- AF26-30-00-11
- AF26-30-00-13 (1SBL237001R1300)
- AF26-30-00-13 1SBL237001R1300
- AF26-30-10-16
- AF26-40-00-13
- AF260-30-11-70 (1SFL537001R7011)
- AF265-30-11,CV:250-500
- AF265-30-11-13
- AF265-30-11-13 (1SFL547002R1311)
- AF265-40-00-13
- AF26Z-30-00-21
Procurement and maintenance handover
When requesting a quotation for AF26-30-00-13, provide the full designation, ABB order number, quantity, installed revision, application voltage, connected load or field-device type, required approvals and delivery destination. Ask the supplier to confirm that the supplied AF26-30-00-13 matches the stated hardware and accessory configuration. Do not substitute a neighboring family code without engineering review.
