1SFL597001R7011 (AF460-30-11): AF460 three-pole contactor application and replacement review
1SFL597001R7011 (AF460-30-11) is a AF460 three-pole contactor. The technical data below separates documented family characteristics from ordering-code options that need verification on the actual unit.
Technical facts to verify
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | 1SFL597001R7011 (AF460-30-11) |
| ABB order code | 1SFL597001R7011 |
| Main poles | 3 |
| Control voltage | 100–250 V AC/DC |
| General use UL/CSA | 650 A at 600 V AC; observe application category |
The data for 1SFL597001R7011 (AF460-30-11) supports initial identification. For a purchase decision, use the actual nameplate and the manufacturer's documentation for the complete installed configuration.
Where this designation fits
For 1SFL597001R7011 (AF460-30-11), Evaluate motor-starting duty, isolation frequency, bypass sequence or distribution service before choosing the contactor. Coil supply tolerance and utilization category govern reliable switching.
Record the operating duty, supply and field interfaces of 1SFL597001R7011 (AF460-30-11). A same-family designation may still have a different electrical rating, connection, firmware or approval.
Related designations in the same product line
The following codes have a same-line relationship to 1SFL597001R7011 (AF460-30-11). Their ratings and options can differ; they are references for an enquiry, not approved substitutes.
- 1SFL597001R7011
Configuration gate before ordering
For 1SFL597001R7011 (AF460-30-11), Check the exact AF460 suffix, auxiliary-contact arrangement, power terminals, mechanical envelope and short-circuit coordination. Do not treat all AF460 coil variants as equivalent.
The RFQ for 1SFL597001R7011 (AF460-30-11) should include the full designation, quantity, clear nameplate photo, revision, drawings and required delivery date. Request explicit confirmation of every proposed alternative.
Site acceptance and maintenance
For 1SFL597001R7011 (AF460-30-11), Isolate the feeder, inspect torque and contact condition, then prove pickup, drop-out, feedback contacts and the upstream protection sequence under controlled conditions.
File the test record under 1SFL597001R7011 (AF460-30-11) and keep the as-left wiring, settings and firmware with the asset history. Site safety procedures and the exact manufacturer's instructions govern the work.
Procurement handover
Use 1SFL597001R7011 (AF460-30-11) consistently in the quotation, purchase order and maintenance record. Ask the supplier to state whether the offered item is the exact designation or a documented successor.
Before energizing 1SFL597001R7011 (AF460-30-11), compare the supplied labels, accessories and approvals with the approved engineering documents. Retain the inspection and acceptance results for future service.
