AF580-30-11 contactor selection for high-current motor switching
AF580-30-11 is an ABB AF high-current contactor designation; the listed product code is 1SFL617001R7011. ABB's AF high-current contactor data describes a 3-pole device with 1 NO and 1 NC auxiliary contacts and an order-code-dependent coil. Confirm the exact operational current and AC-3 motor duty using the current ABB table rather than relying on the 580 model designation alone.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Model | AF580-30-11 |
| ABB order code | 1SFL617001R7011 |
| Contactor family | ABB AF high-current contactor |
| Main contact configuration | 3-pole contactor family |
| Auxiliary contacts | 1 NO + 1 NC designation; verify terminal diagram |
| Coil supply | Order-code-specific wide-range coil; verify voltage and control supply from nameplate |
| Application rating | Select by utilization category, motor duty and switching frequency |
Identification note: AF580-30-11. The figures above are selection references; verify the actual label, duty rating, approvals, firmware and options for the exact unit before purchase or engineering release.
Application envelope
Use AF580-30-11 as a switching element in an engineered motor or power circuit where its utilization category, coil control and electrical endurance suit the load. Check whether the application is direct-on-line, reversing or another starter topology, and coordinate the contactor with the overload relay, short-circuit protective device and switching frequency.
- Confirm the process or load duty.
- Match the exact code and interfaces.
- Verify protection, approvals and lifecycle status.
Model family references
The following model references belong to the same identifiable family as AF580-30-11; they are configuration alternatives, not automatic substitutes. Compare each complete designation and application before selecting.
- 1SFL617001R7011 (AF580-30-11)
- 1SFL617001R7011 AF580-30-11-13,580A
- AF580-30-11 1SL617001R7011
- AF580-30-11, 1SFL617001R7011
For the AF580-30-11 record, retain the full type string and do not infer range, rating or compatibility from a shortened family code.
Order-code review
Verify the AF580-30-11 main-current rating, motor power at the actual line voltage, coil voltage, auxiliary contact arrangement, terminal adapters and enclosure temperature. Confirm the control source can supply the coil and that low-voltage PLC control, if used, is within ABB's specified input range. Check service availability and exact code revision before replacing a large contactor.
Commissioning record
Isolate the power and control circuits, inspect pole condition and mounting, and connect the coil and auxiliary contacts from the product diagram. Confirm coil polarity where required, terminal torque and arc/chamber clearances. Test pull-in, drop-out, interlocks and overload trip behavior under a controlled procedure before returning AF580-30-11 to service.
For procurement, quote the complete designation AF580-30-11 and state the required quantity, destination, duty and delivery window.
