ABB AF63-30-00 application questions and verified data
Use the ABB AF63-30-00 identification below as the initial technical checkpoint for a real installation. Any incomplete suffix or coil notation must be resolved against the delivered label.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | AF63-30-00 |
| Product family | AF63 |
| Component role | three-pole electronic-coil contactor |
| Type | AF63-30-00 |
| Main poles | 3 |
| Auxiliary code | 00; check installed contacts |
| Control | Coil suffix not supplied; inspect nameplate |
| System | ABB AF contactor family |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB AF63-30-00 values describe the cited catalog reference. Verify nameplate details and plant conditions before treating them as acceptance limits.
Which inputs determine the correct order?
For ABB AF63-30-00, confirm coil suffix, main duty, auxiliary need and protection. Photograph the installed label and terminals before any disconnection.
The exact ABB AF63-30-00 designation matters: coil code, pole arrangement, enclosure, processor revision or protocol may change despite a similar appearance.
What work is assigned to this part?
ABB AF63-30-00 is requested to control a specified industrial load. Define the specific motor, circuit or controller tag and the event that prompted the replacement.
Keep the ABB AF63-30-00 request bounded to the component and its documented accessories. A change to control logic or protection settings is a separate engineering decision.
What must be preserved during replacement?
Before ABB AF63-30-00 is removed, retain cable identification, setting files, drawings and a baseline of normal indications. Follow the plant's energy-isolation procedure.
Fit ABB AF63-30-00 with the specified clearances, grounding, terminals and protective devices. Do not modify other equipment merely to accommodate a different variant.
How do ratings become a site decision?
Compare the ABB AF63-30-00 verified values in the table with the real supply, load, environment and installation. A catalog capability only applies under its stated conditions.
If ABB AF63-30-00 lacks a verified option or rating for this plant, obtain ABB documentation or written engineering approval before ordering.
How should purchasing treat an alternative?
For ABB AF63-30-00, the RFQ should include the complete model, approved article number where available and the equipment label. State required accessories separately.
A proposed substitute for ABB AF63-30-00 needs a comparison of ratings, fit, approvals, control interface and commissioning effort before acceptance.
Which checks prove the installation?
After approved installation of ABB AF63-30-00, test coil energization and pole continuity. Include connected interlocks and all states that the process owner requires.
Record the ABB AF63-30-00 serial or revision, test conditions, observed results and witness. Return the plant to normal only after sign-off.
Same-series models to discuss with the supplier
The following AF63 references are grouped with ABB AF63-30-00. They are not automatically interchangeable; compare each full code and its electrical, mechanical or software options.
No other unassigned AF63 code is grouped with ABB AF63-30-00 in this release.
Final handover
Keep the ABB AF63-30-00 selection evidence, ordered code, installed label and test report together with the equipment record.
Where ABB AF63-30-00 is part of a safety or production-critical circuit, retain the approved rollback plan and operating authorization.
