ABB APOW-11C 3AUA0000061236 service dossier and selection checkpoints
This ABB APOW-11C 3AUA0000061236 dossier turns a type code into a practical replacement decision. Start with the bounded technical data, then confirm the installation-specific details before purchase.
Technical identification and selection data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | APOW-11C 3AUA0000061236 |
| Product family | APOW-11C |
| Component role | ACS800 converter power-supply board |
| Board type | APOW-11C |
| Listed role | Power-supply board in ABB ACS800-67 hardware layout |
| Source code | 3AUA0000061236; confirm against board label |
| Position | A43 in cited converter layout |
| Compatibility | ABB manual specifies allowed board/protection combinations |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Values recorded for ABB APOW-11C 3AUA0000061236 are tied to the cited manufacturer documentation where stated. Any incomplete option or conflicting article reference must be resolved against the delivered unit.
Identification on the installed asset
Read the complete ABB APOW-11C 3AUA0000061236 nameplate or board label, photograph both faces and record the article number, revision and any option markings. Compare these against the technical record above.
If the ABB APOW-11C 3AUA0000061236 label is missing or differs from the purchasing text, use the equipment BOM, ABB service record and original wiring diagram to resolve the difference before ordering.
Scope of this replacement
ABB APOW-11C 3AUA0000061236 is considered here to replace the identified converter power-supply board. Tie the request to the actual equipment tag, failure evidence and approved maintenance window before anyone selects a part.
An ABB APOW-11C 3AUA0000061236 quotation should identify whether the requirement is an exact like-for-like replacement or an engineered change. Neither a family name nor a similar-looking housing proves interchangeability.
Installation controls
Before handling ABB APOW-11C 3AUA0000061236, back up settings where relevant, identify all cables and apply the site's lockout and stored-energy procedure. Protect connectors, sensors and optical links from damage.
Fit ABB APOW-11C 3AUA0000061236 only with the specified mounting hardware, clearances, grounding and accessories. Record any terminal or mechanical differences as a change request, not an undocumented field adaptation.
Electrical and functional fit
For ABB APOW-11C 3AUA0000061236, verify module frame, A43 location, board revision, connectors and protection-board pair. Confirm the actual site supply, terminal arrangement, environmental limits and control scheme rather than copying a rating from a related device.
The ABB APOW-11C 3AUA0000061236 installation must preserve the original protection, isolation, communications and process behavior. A changed option or firmware revision needs engineering review and a documented acceptance test.
Commercial handover
A purchase request for ABB APOW-11C 3AUA0000061236 should state the full model string, confirmed article code, quantity, condition, included accessories and expected documentation. Ask the supplier to disclose substitutions explicitly.
Keep the ABB APOW-11C 3AUA0000061236 supplier confirmation, label photograph and field test record with the asset file. This helps the next maintenance team distinguish a verified spare from a visually similar option.
Commissioning evidence
After ABB APOW-11C 3AUA0000061236 is fitted, verify converter self-test and all power-supply diagnostics. Compare the response with the pre-work baseline and approved operating sequence.
For ABB APOW-11C 3AUA0000061236, retain test conditions, measured observations, alarm status and sign-off. Restore production only after the plant owner accepts the result and the rollback plan remains available.
Related configurations and decision boundary
The APOW-11C codes below are grouped with ABB APOW-11C 3AUA0000061236 for supplier discussion only. Compare full options, measurement function, electrical ratings and firmware before any substitute is accepted.
No other unassigned APOW-11C source code is grouped with ABB APOW-11C 3AUA0000061236 in this release.
Closeout record
Record the final ABB APOW-11C 3AUA0000061236 identity, installed location and tested configuration in the maintenance record.
Keep the ABB APOW-11C 3AUA0000061236 acceptance evidence and the approved return-to-service authorization together.
