Technical fit record for ABB BMS412C40 2CDS642041R0404
ABB BMS412C40 2CDS642041R0404 is indexed here as a specific buying and service reference. Confirm its complete designation before assuming that another family member has the same terminals, electrical duty or approvals.
Verified technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | BMS412C40 2CDS642041R0404 |
| Product family | BMS412C40 |
| Component role | ABB basic M two-pole miniature breaker |
| Poles | 2 |
| Rated current | 40 A |
| Trip curve | C |
| Breaking capacity | 4.5 kA catalog class |
| Order code | 2CDS642041R0404 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The table for ABB BMS412C40 2CDS642041R0404 separates verified family data from the configuration checks that still require a nameplate or ABB order record. Do not use a family rating as an unconditional guarantee for the installed unit.
Interface checklist
Before ordering BMS412C40 2CDS642041R0404, compare the installed terminal or connector arrangement, power source, mounting envelope and ancillary hardware with the current drawing.
Document the serial number and revision of BMS412C40 2CDS642041R0404 where available. If a supplier proposes a substitute, obtain engineering acceptance for every changed interface.
Receipt inspection
On arrival, compare the supplied BMS412C40 2CDS642041R0404 label and order code with the approved purchase description. Inspect packaging, terminals, seals and visible damage.
Do not install BMS412C40 2CDS642041R0404 when the shipped suffix, control voltage, release or approval differs from the approved build; resolve that discrepancy before commissioning.
Purchase decision
Specify ABB BMS412C40 2CDS642041R0404 against a particular asset tag and duty. This unit is used to protect a two-pole distribution branch; record the intended circuit, process or equipment location before requesting a quote.
For BMS412C40 2CDS642041R0404, confirm prospective fault current, conductor size, C-curve inrush and voltage. A matching short family name is not sufficient evidence of electrical, mechanical or software interchangeability.
Commissioning evidence
For BMS412C40 2CDS642041R0404, verify both-pole isolation and circuit identification. Carry out only the tests approved for this device and the connected installation.
Save the as-left settings, measured results, witness and work-order reference for BMS412C40 2CDS642041R0404. Any temporary bypass or inhibited alarm must be removed before normal operation.
Site preparation
Plan the BMS412C40 2CDS642041R0404 replacement under the facility isolation and permit rules. Preserve photographs, configuration files, settings and a diagnostic baseline before disturbing wiring.
Check enclosure temperature, grounding, segregation and protection coordination for BMS412C40 2CDS642041R0404. Record any accessory that is supplied separately rather than assuming it is in the device box.
Lifecycle handover
Keep ABB BMS412C40 2CDS642041R0404 linked to its exact spares description, drawings and current manual revision. This helps the next maintenance team identify the same configuration rather than a superficially similar item.
Review the first operating period of BMS412C40 2CDS642041R0404 for alarms, heating, drift or switching anomalies and update the asset record if the installed build differs from the original request.
Related configuration references
The following BMS412C40 codes are recorded with ABB BMS412C40 2CDS642041R0404 for enquiry. Suffixes may alter ratings, dimensions, approvals or accessories; these are not automatic replacements.
No additional unassigned BMS412C40 code is grouped with BMS412C40 2CDS642041R0404 at this stage.
Information to send with an enquiry
Quote ABB BMS412C40 2CDS642041R0404 exactly and include the asset tag, electrical or process duty, required accessories and delivery documentation.
For BMS412C40 2CDS642041R0404, request written confirmation of any deviation from the fitted unit before accepting an alternative.
