CM-PSS.41S (1SVR730784R3300) technical selection worksheet
Use the complete CM-PSS.41S (1SVR730784R3300) designation when requesting this three-phase monitoring relay. The installation must be checked against the actual equipment marking, because a shared product family does not establish identical ratings, options or approvals.
Key technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | CM-PSS.41S (1SVR730784R3300) |
| Product family | CM-PSS.41S |
| Component role | three-phase monitoring relay |
| Monitored network | Three-phase 400 V AC class |
| Threshold | Fixed +/-10% phase voltage window; confirm exact unit |
| Output | 2 change-over contacts |
| Order code | 1SVR730784R3300 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
This table identifies the published family facts for CM-PSS.41S (1SVR730784R3300). Treat any unlisted option as a selection question, not as an implied specification for CM-PSS.41S (1SVR730784R3300). Consult the current ABB data and the installed nameplate before release.
What the device does
The work assigned to CM-PSS.41S (1SVR730784R3300) is specific: Supervise the feeder state used by the panel permissive or alarm circuit. Record the controlled process, feeder or network point in which CM-PSS.41S (1SVR730784R3300) operates.
Check the upstream source and the downstream load or signal as a complete path. For CM-PSS.41S (1SVR730784R3300), an apparently matching connector or housing does not establish functional equivalence.
Match the ordered configuration
The most important purchase question for CM-PSS.41S (1SVR730784R3300) is: Check line voltage and frequency, phase sequence, output contacts, time behavior and wiring before replacement. Record any missing suffix, revision, calibration or approval with the supplier.
Ask whether the offered CM-PSS.41S (1SVR730784R3300) item includes the required terminals, accessories and documentation. Any suggested substitute needs a line-by-line comparison, not an assumption based on the family prefix.
Installation boundary
Before fitting CM-PSS.41S (1SVR730784R3300), isolate the process or electrical system under the site procedure and check the drawing, connection, mounting and environmental limits.
Document the original terminals and settings for CM-PSS.41S (1SVR730784R3300). Reapply only approved wiring and parameter changes; retain the previous unit identification for traceability.
Commissioning evidence
The practical acceptance check for CM-PSS.41S (1SVR730784R3300) is: Simulate approved voltage/phase faults and verify alarm, contact transition and return behavior. Capture actual readings, states or faults rather than reporting only that the device powered up.
Close the work order for CM-PSS.41S (1SVR730784R3300) with the observed test result, final configuration and responsible reviewer. If a safety or protective function is involved, follow the site-specific validation procedure.
Other codes within this series
The following CM-PSS.41S designations are grouped on the CM-PSS.41S (1SVR730784R3300) page to aid searches and enquiries. They may differ in rating, options, protocol or dimensions. Confirm each full designation before substitution.
No other unassigned CM-PSS.41S designation is included with CM-PSS.41S (1SVR730784R3300) at this stage.
Enquiry details to send
Quote CM-PSS.41S (1SVR730784R3300) exactly, then state the installed equipment, required quantity, delivery location and whether a new unit or an approved service spare is needed.
For CM-PSS.41S (1SVR730784R3300), request the current datasheet, option confirmation and lead time. On receipt, compare the supplied marking to the approved enquiry and retain the commissioning notes with the equipment record.
