Installed-equipment notes for EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1)
Keep the entire EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1) designation with the maintenance request. EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1) belongs to a specific equipment design; the visible family name alone is insufficient for a replacement decision.
Product data and selection limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1) |
| Product family | EKIP 10K |
| Component role | Ekip metering and protection accessory |
| Device | Ekip 10K |
| Installation | DIN-rail mounting version |
| Order code | 1SDA074171R1 |
| Compatibility | Confirm Ekip integration and installed circuit-breaker system |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
For EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1), the table identifies useful checks but does not replace the marked unit and its complete technical documentation. Confirm option and revision details before purchase.
What the replacement must match
Before substituting EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1), compare controller or trip-unit interface, auxiliary supply, wiring and software version. Check the exact code and nameplate against the purchase specification.
Do not call another EKIP 10K designation a direct replacement for EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1) solely because its enclosure looks similar. Ratings and fitted options require separate confirmation.
Equipment role
The installed role of EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1) is to provide the configured Ekip function within the approved switchgear system. Write down the connected circuit, controller or process tag and the equipment being served.
A failure around EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1) may also arise from the supply, sensor, wiring, communications or mechanical accessory. Capture the symptoms before removing parts.
Commissioning handover
After fitting EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1), verify the configured measurement and alarm path in the installed system. Record the test method, readings, settings and any open deviation.
Release EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1) for service only after the relevant protection, communication or measurement response has been witnessed and the asset record is updated.
Field fault isolation
For an unexplained EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1) fault, note the present indicators and alarm history. Measure only at safe accessible test points according to the plant procedure.
When EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1) interacts with a controller or protective system, verify the upstream command and downstream response independently before deciding which component failed.
Related family designations
These EKIP 10K designations are included with EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1) to support model searches and enquiries. Individual specifications can differ, and they are not automatically interchangeable.
No other unassigned EKIP 10K code is grouped with EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1) here.
Ordering record
Retain the EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1) nameplate image, purchase code and configuration note with the quotation. Include the commissioning results when the unit is installed.
If a future EKIP 10K E1.2..E6.2-Tmax XT (1SDA074171R1) replacement is required, compare its complete code with the installed record again rather than relying on this page alone.
