ESB16-20N-01 in the installed application
The full ESB16-20N-01 marking belongs on the enquiry and the receiving inspection. ESB16-20N-01 is a installation contactor for modular loads whose suitability depends on the actual connected process, circuit or control project.
Technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | ESB16-20N-01 |
| Product family | ESB16 |
| Component role | installation contactor for modular loads |
| Main contacts | 2 NO |
| AC-1 rated current | 16 A |
| Control supply | 24 V AC/DC |
| Order code | 1SBE111111R0120 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Read these ESB16-20N-01 parameters together with the nameplate and the manufacturer's option data. The short family label does not establish every rating or installed accessory.
Questions for the quotation
Ask the supplier to confirm this ESB16-20N-01 match: Check contact use, 24 V control supply, load inrush, enclosure temperature and DIN-rail clearance. Attach the installed full code and relevant drawings to the enquiry.
A similar item is not automatically equivalent to ESB16-20N-01. Ask for a written comparison of ratings, interfaces, terminals, dimensions, options and required firmware or settings.
How to prepare the replacement
Before working on ESB16-20N-01, follow the plant's isolation or process-shutdown procedure. Photograph or record terminal positions, accessory parts, settings and current indications.
For ESB16-20N-01, compare the delivered identification with the approved order. Fit only the required components and restore an approved backup rather than recreating settings from memory.
Application snapshot
The intended function of ESB16-20N-01 is: Switch the assigned lighting, heating or building load from a low-voltage command circuit. Record the real process or electrical duty and the equipment that sends or receives the signal.
For ESB16-20N-01, note any site condition that changes selection: mounting position, ambient temperature, load profile, supply quality, hazardous-area conditions or the existing communication project.
What to observe on startup
The acceptance test for ESB16-20N-01 is: Verify coil operation, both main contacts and upstream protective coordination under an approved load test. Compare measured results and indications with the commissioning record.
If ESB16-20N-01 forms part of a protective function, verify fault response and reset in addition to normal operation. Keep the final readings and sign-off with the maintenance file.
Other designations in this family
The following ESB16 codes are gathered with ESB16-20N-01 for search and purchase enquiries. They can differ in sensor, coil, rating, pole count, communication or accessories. Check each complete code; they are not automatically direct replacements.
- 1SBE111111M0102 ESB16-02N-01
Receiving checklist
When ESB16-20N-01 arrives, compare the marked code, revision and included accessories with the order. Record any variance before the equipment is installed.
Retain the ESB16-20N-01 technical document, inspection and commissioning result with the asset record so the next replacement can be matched accurately.
