Technical review before ordering F204 A-100/0.03 AP-R
The full F204 A-100/0.03 AP-R marking belongs on the enquiry and the receiving inspection. F204 A-100/0.03 AP-R is a four-pole type A residual-current breaker whose suitability depends on the actual connected process, circuit or control project.
Technical parameters
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | F204 A-100/0.03 AP-R |
| Product family | F204 A AP-R |
| Component role | four-pole type A residual-current breaker |
| Poles | 4 |
| Rated current | 100 A |
| Residual sensitivity | 30 mA |
| Residual waveform | Type A |
| Response | AP-R high-immunity/short-delay variant |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
Read these F204 A-100/0.03 AP-R parameters together with the nameplate and the manufacturer's option data. The short family label does not establish every rating or installed accessory.
Questions for the quotation
Ask the supplier to confirm this F204 A-100/0.03 AP-R match: Confirm fault waveform suitability, neutral routing, 100 A continuous duty and protective coordination. Attach the installed full code and relevant drawings to the enquiry.
A similar item is not automatically equivalent to F204 A-100/0.03 AP-R. Ask for a written comparison of ratings, interfaces, terminals, dimensions, options and required firmware or settings.
How to prepare the replacement
Before working on F204 A-100/0.03 AP-R, follow the plant's isolation or process-shutdown procedure. Photograph or record terminal positions, accessory parts, settings and current indications.
For F204 A-100/0.03 AP-R, compare the delivered identification with the approved order. Fit only the required components and restore an approved backup rather than recreating settings from memory.
Application snapshot
The intended function of F204 A-100/0.03 AP-R is: Detect AC and pulsating-DC residual faults on the specified distribution circuit. Record the real process or electrical duty and the equipment that sends or receives the signal.
For F204 A-100/0.03 AP-R, note any site condition that changes selection: mounting position, ambient temperature, load profile, supply quality, hazardous-area conditions or the existing communication project.
What to observe on startup
The acceptance test for F204 A-100/0.03 AP-R is: Use the specified instrumented trip test, inspect reset and record the measured response. Compare measured results and indications with the commissioning record.
If F204 A-100/0.03 AP-R forms part of a protective function, verify fault response and reset in addition to normal operation. Keep the final readings and sign-off with the maintenance file.
Other designations in this family
The following F204 A AP-R codes are gathered with F204 A-100/0.03 AP-R for search and purchase enquiries. They can differ in sensor, coil, rating, pole count, communication or accessories. Check each complete code; they are not automatically direct replacements.
No other unassigned F204 A AP-R code is grouped with F204 A-100/0.03 AP-R here.
Receiving checklist
When F204 A-100/0.03 AP-R arrives, compare the marked code, revision and included accessories with the order. Record any variance before the equipment is installed.
Retain the F204 A-100/0.03 AP-R technical document, inspection and commissioning result with the asset record so the next replacement can be matched accurately.
ABB F20 visually similar order-code references
These strings are collected by their similar printed ordering-code format. They may identify different device types, electrical ratings or accessories. Listing them together does not mean they share a product series, function, approval or interchangeability. Confirm the exact ABB designation and manufacturer documentation before ordering or substitution.
F202 AC references
- F202 AC-25/0.1
F204 A- references
- F204 A-100/0.03 AP-R
- F204 A-40/0.03 AP-R
F204 AC references
- F204 AC-40/0.03
- F204 AC-63/0,03 (2CSF204001R1630)
F204АС- references
- F204АС-25/30
- F204АС-63/300
Additional ABB ordering and listing references
The following catalog strings are shown to help identify visually related codes or a shared printed order-code reference. They may describe different products and are not interchangeable by default. Verify the full manufacturer designation, ratings and application before ordering.
- IN F202 25A-30mA/AC
