FET612-Y0F170F2A6CWYK0M5TCTK1: remote-sensor interface and output configuration
ABB's FEM610 documentation identifies FET612 as a remote transmitter with an active 4–20 mA output and two configurable passive digital outputs. The precise suffix must be checked before assigning an enclosure, supply or display option to this unit.
Verified identification and technical data
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | FET612-Y0F170F2A6CWYK0M5TCTK1 |
| Product role | Remote electromagnetic-flow transmitter |
| System family | ProcessMaster FEM610 |
| Analog output | Active 4–20 mA family interface |
| Other outputs | Two configurable passive digital outputs in family manual |
| Remote cable | Up to 50 m family maximum, subject to installation |
For FET612-Y0F170F2A6CWYK0M5TCTK1, the table is an identification and selection aid. A nameplate, ABB order record and the actual installation still govern the final configuration.
Confirm the full type, revision and installation limits before treating any related code as a replacement.
Order and compatibility gate
When specifying FET612-Y0F170F2A6CWYK0M5TCTK1, Check exact power supply, field housing, cable glands, output configuration and remote-sensor compatibility against the ABB order record and both nameplates.
Send the full designation FET612-Y0F170F2A6CWYK0M5TCTK1, hardware or serial revision, quantity, delivery need and nameplate photograph with the RFQ. Require written confirmation of any proposed successor or option-code change.
Application decision
Review the duty before choosing FET612-Y0F170F2A6CWYK0M5TCTK1. Confirm the paired flow sensor, line size, fluid conductivity, sensor cable route and process conditions. The transmitter cannot be selected as a complete magnetic flowmeter without the correct sensor and calibration record.
The decision for FET612-Y0F170F2A6CWYK0M5TCTK1 should record actual load or process limits, operating environment, normal behavior and the response to a fault. This avoids a selection based only on a familiar series name.
Same-series designation index
The codes below share a product family or an identified order-code relationship with FET612-Y0F170F2A6CWYK0M5TCTK1. They may differ in rating, software, connections, options or approvals; none is automatically interchangeable.
No additional same-series designation is shown for FET612-Y0F170F2A6CWYK0M5TCTK1; confirm the exact ordered assembly before purchase.
Installation and proving
For FET612-Y0F170F2A6CWYK0M5TCTK1, After electrical isolation, inspect sensor and coil cables, restore configuration, test the 4–20 mA scaling and digital outputs, then compare the displayed flow with a known operating condition.
Record the as-left settings, test results and installed interfaces of FET612-Y0F170F2A6CWYK0M5TCTK1. Make the asset record searchable by the complete designation, not only by a short family label.
Handover record
The buyer and site engineer should agree on a single verified configuration for FET612-Y0F170F2A6CWYK0M5TCTK1, including accessories, documentation and the accepted test procedure. Keep deviations visible to both procurement and maintenance.
Retain FET612-Y0F170F2A6CWYK0M5TCTK1 in the purchase order, asset register and commissioning record. ABB family specifications help identify the device, but the approved project documents determine whether it is suitable for this installation.
