FSS430.A9.C1.F200R0.A1.A1.B1.H1-L1.SP0.M5.NC1: process, connection and output configuration
ABB describes SwirlMaster FSS430 as a swirl flowmeter for gases, low-viscosity liquids and steam. Family literature lists ±0.5% of rate accuracy and multiple output choices, but the complete suffix must be decoded before assigning any particular connection or protocol to this unit.
Verified identification and technical data
| Technical item | Verified value / selection note |
|---|---|
| Full designation | FSS430.A9.C1.F200R0.A1.A1.B1.H1-L1.SP0.M5.NC1 |
| Measurement principle | Swirl flow |
| Family media | Gases, liquids and steam |
| Family accuracy | ±0.5% of rate under specified conditions |
| Family size span | Flanged DN15–DN400 options |
| Communications | 4–20 mA/HART 7 or other family options; decode exact code |
For FSS430.A9.C1.F200R0.A1.A1.B1.H1-L1.SP0.M5.NC1, the table is an identification and selection aid. A nameplate, ABB order record and the actual installation still govern the final configuration.
Confirm the full type, revision and installation limits before treating any related code as a replacement.
Order and compatibility gate
When specifying FSS430.A9.C1.F200R0.A1.A1.B1.H1-L1.SP0.M5.NC1, Check the exact sensor size, flange standard, wetted materials, installation orientation, electronics and output configuration against ABB's order record and the nameplate. Do not infer F200R0 or other suffix fields from a generic family table.
Send the full designation FSS430.A9.C1.F200R0.A1.A1.B1.H1-L1.SP0.M5.NC1, hardware or serial revision, quantity, delivery need and nameplate photograph with the RFQ. Require written confirmation of any proposed successor or option-code change.
Application decision
Review the duty before choosing FSS430.A9.C1.F200R0.A1.A1.B1.H1-L1.SP0.M5.NC1. Specify actual fluid, temperature, pressure, flow span, pipe size and available straight run. For steam service, establish density or temperature compensation and expected wetness conditions.
The decision for FSS430.A9.C1.F200R0.A1.A1.B1.H1-L1.SP0.M5.NC1 should record actual load or process limits, operating environment, normal behavior and the response to a fault. This avoids a selection based only on a familiar series name.
Same-series designation index
The codes below share a product family or an identified order-code relationship with FSS430.A9.C1.F200R0.A1.A1.B1.H1-L1.SP0.M5.NC1. They may differ in rating, software, connections, options or approvals; none is automatically interchangeable.
- FSS430.A9.C1.F200R0.A1.A1.B1.H1-L1.SP0.MW.NC1
- FSS430.N1.C1.F100R0.A1.A1.P1-L1.SP0.S1.C2.T1.M5
Installation and proving
For FSS430.A9.C1.F200R0.A1.A1.B1.H1-L1.SP0.M5.NC1, Plan a process-safe removal with line drained or depressurized. Verify orientation, grounding, impulse or temperature accessories if fitted, output scaling and indicated flow against a known operating point.
Record the as-left settings, test results and installed interfaces of FSS430.A9.C1.F200R0.A1.A1.B1.H1-L1.SP0.M5.NC1. Make the asset record searchable by the complete designation, not only by a short family label.
Handover record
The buyer and site engineer should agree on a single verified configuration for FSS430.A9.C1.F200R0.A1.A1.B1.H1-L1.SP0.M5.NC1, including accessories, documentation and the accepted test procedure. Keep deviations visible to both procurement and maintenance.
Retain FSS430.A9.C1.F200R0.A1.A1.B1.H1-L1.SP0.M5.NC1 in the purchase order, asset register and commissioning record. ABB family specifications help identify the device, but the approved project documents determine whether it is suitable for this installation.
