ABB OTM630E3YM230C (1SCA136615R1001) technical application brief
Use ABB OTM630E3YM230C (1SCA136615R1001) as the complete reference for this equipment position. Matching a family name alone does not establish module fit, electrical ratings or permitted service configuration.
Technical parameters and limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | OTM630E3YM230C (1SCA136615R1001) |
| Product family | OTM630E3YM230C |
| Component role | motorized three-pole bypass switch |
| Function | Motorized bypass/changeover switching |
| Poles | 3 |
| Current frame | 630 A |
| Control | 230 V motor version |
| Order code | 1SCA136615R1001 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The OTM630E3YM230C (1SCA136615R1001) values above are selection checkpoints. Check the fitted nameplate and current ABB installation documents before releasing a replacement or changing field wiring.
Asset purpose
ABB OTM630E3YM230C (1SCA136615R1001) is intended to provide the specified motorized bypass transfer path. Record the cabinet, circuit or loop tag and the controlled process so the purchase is linked to a defined duty.
A OTM630E3YM230C (1SCA136615R1001) replacement request should identify the installed hardware revision and the reason for change, including any active alarm or failed test.
Connection evidence
For OTM630E3YM230C (1SCA136615R1001), inspect transfer logic, interlocks, control voltage, source ratings and shaft. Verify the exact terminals, power path, mechanical keying and software interface against the site drawing.
If a proposed OTM630E3YM230C (1SCA136615R1001) has different connectors or ratings, stop the swap and document the engineering decision rather than assuming series compatibility.
Before energizing
Isolate the affected circuit before working on OTM630E3YM230C (1SCA136615R1001), following the plant procedure. Preserve wiring photos, parameters and a known-good diagnostic snapshot.
Seat and terminate OTM630E3YM230C (1SCA136615R1001) with the specified accessories. Check grounding, segregation and installation environment before power is restored.
Diagnostic baseline
For later troubleshooting of OTM630E3YM230C (1SCA136615R1001), capture supply status, module diagnostics, output state and the relevant process reading. This makes it possible to distinguish a device fault from a field issue.
Compare OTM630E3YM230C (1SCA136615R1001) with the pre-change baseline after installation. Investigate unexpected alarms, temperature, noise or switching before returning the asset to normal duty.
Acceptance test
For OTM630E3YM230C (1SCA136615R1001), witness commanded transfer and blocked unsafe states. Record the result, witness and acceptance date, including any temporary bypass or inhibited alarm that must be removed.
Close the OTM630E3YM230C (1SCA136615R1001) work order only when as-left settings and drawings reflect the actual installation.
Other configuration references
These OTM630E3YM230C references are indexed alongside ABB OTM630E3YM230C (1SCA136615R1001) for enquiry. Different options, ratings or approvals may apply, so the codes are not automatic substitutes.
No additional unassigned OTM630E3YM230C designation is grouped under OTM630E3YM230C (1SCA136615R1001).
Procurement handoff
Quote ABB OTM630E3YM230C (1SCA136615R1001) exactly, including the application tag, required accessories, installation conditions and documentation revision.
At receipt, compare the supplied OTM630E3YM230C (1SCA136615R1001) against the approved code before fitting. Retain the acceptance evidence with the asset record.
