Field selection notes for ABB PM 802F (3BDH000002R1)
ABB PM 802F (3BDH000002R1) is an exact ordering reference for Freelance AC 800F controller base unit. Confirm its application and article identity before treating another series member as equivalent.
Technical data and selection limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | PM 802F (3BDH000002R1) |
| Product family | PM 802F |
| Component role | Freelance AC 800F controller base unit |
| Complete designation | PM 802F (3BDH000002R1) |
| Device family | PM 802F |
| Base unit | PM 802F |
| Memory | 4 MB battery-buffered in ABB spare-parts reference |
| Article | 3BDH000002R1; verify controller revision |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB PM 802F (3BDH000002R1) data above are tied to the cited manufacturer reference where stated. Verify all option-dependent values against the delivered label and equipment documentation.
Purpose in the installation
The specified ABB PM 802F (3BDH000002R1) is intended to replace the approved AC 800F controller base. Start with the asset tag and the original circuit or network drawing so the procurement request addresses the right service position.
Before ordering ABB PM 802F (3BDH000002R1), identify the process or motor-control consequence of a missing, failed or changed component. A same-size device may still have different wiring, firmware or operating behavior.
Read the whole identity
Record the complete ABB PM 802F (3BDH000002R1) designation, the marked article code, hardware revision and any approval label. Photograph the installed item and compare those details with the purchase request.
If the nameplate does not support the ABB PM 802F (3BDH000002R1) description, stop the substitution decision and use the OEM bill of materials or engineering change record to resolve it.
Interface and configuration match
For ABB PM 802F (3BDH000002R1), verify Freelance software, project backup, I/O buses and memory. Also compare supply, connections, mounting and ambient conditions at the actual cabinet or field location.
Where ABB PM 802F (3BDH000002R1) communicates with a controller or fieldbus, confirm software support and the configured address or device name. Where it is an electrical accessory, confirm ratings and coordination.
Preparation and isolation
Plan the ABB PM 802F (3BDH000002R1) change with the site's lockout, stored-energy and permit rules. Save parameters and diagnostic evidence if the component forms part of a programmable system.
Label every connection on ABB PM 802F (3BDH000002R1) before removal. Protect plug pins, terminal threads and optical or network connectors from contamination during handling.
Receipt and installation
At goods receipt, compare the delivered ABB PM 802F (3BDH000002R1) code, packaging and included accessories with the approved order. Do not rely on the seller's short description alone.
Fit ABB PM 802F (3BDH000002R1) with the specified cable, terminal unit, orientation and tightening instructions. Record any deviation from the old assembly for engineering review before energization.
Acceptance at the site
After ABB PM 802F (3BDH000002R1) is installed, restore the project and prove redundant or fieldbus behavior. Check the healthy state, alarms and response to a controlled fault as permitted by the site's procedure.
Keep the ABB PM 802F (3BDH000002R1) as-left settings, measured values and sign-off together. Release the asset only after its normal control or protection sequence has been observed.
Supplier and maintenance handover
A request for ABB PM 802F (3BDH000002R1) should include the full model string, quantity, asset tag and required delivery condition. Require explicit disclosure of any offered alternative.
File the ABB PM 802F (3BDH000002R1) purchase confirmation, delivered label and acceptance results with the maintenance record so later replacements use verified evidence.
Related configuration references
The following PM 802F notation is grouped with ABB PM 802F (3BDH000002R1) for enquiry only. Compare exact options, rating and connector fit; listing is not proof of interchangeability.
No other unassigned PM 802F code is grouped with ABB PM 802F (3BDH000002R1) in this release.
Closeout checklist
Confirm the final ABB PM 802F (3BDH000002R1) article, installation position and test record against the purchase requirement.
Retain the ABB PM 802F (3BDH000002R1) acceptance and approval trail for the next maintenance cycle.
