Field selection notes for ABB S1-M2-25 ,1SAM201907R1102
ABB S1-M2-25 ,1SAM201907R1102 is an exact ordering reference for three-phase feeder connection terminal. Confirm its application and article identity before treating another series member as equivalent.
Technical data and selection limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | S1-M2-25 ,1SAM201907R1102 |
| Product family | S1-M2-25 |
| Component role | three-phase feeder connection terminal |
| Complete designation | S1-M2-25 ,1SAM201907R1102 |
| Device family | S1-M2-25 |
| Accessory | S1-M2-25 |
| Catalog current | 65 A; verify installation conditions |
| Conductor | Up to 25 mm² catalog version |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The ABB S1-M2-25 ,1SAM201907R1102 data above are tied to the cited manufacturer reference where stated. Verify all option-dependent values against the delivered label and equipment documentation.
Purpose in the installation
The specified ABB S1-M2-25 ,1SAM201907R1102 is intended to feed the matched motor-control assembly. Start with the asset tag and the original circuit or network drawing so the procurement request addresses the right service position.
Before ordering ABB S1-M2-25 ,1SAM201907R1102, identify the process or motor-control consequence of a missing, failed or changed component. A same-size device may still have different wiring, firmware or operating behavior.
Interface and configuration match
For ABB S1-M2-25 ,1SAM201907R1102, verify compatible contactor/protector, conductor, torque and clearances. Also compare supply, connections, mounting and ambient conditions at the actual cabinet or field location.
Where ABB S1-M2-25 ,1SAM201907R1102 communicates with a controller or fieldbus, confirm software support and the configured address or device name. Where it is an electrical accessory, confirm ratings and coordination.
Read the whole identity
Record the complete ABB S1-M2-25 ,1SAM201907R1102 designation, the marked article code, hardware revision and any approval label. Photograph the installed item and compare those details with the purchase request.
If the nameplate does not support the ABB S1-M2-25 ,1SAM201907R1102 description, stop the substitution decision and use the OEM bill of materials or engineering change record to resolve it.
Preparation and isolation
Plan the ABB S1-M2-25 ,1SAM201907R1102 change with the site's lockout, stored-energy and permit rules. Save parameters and diagnostic evidence if the component forms part of a programmable system.
Label every connection on ABB S1-M2-25 ,1SAM201907R1102 before removal. Protect plug pins, terminal threads and optical or network connectors from contamination during handling.
Acceptance at the site
After ABB S1-M2-25 ,1SAM201907R1102 is installed, inspect phases and connection temperature after energization. Check the healthy state, alarms and response to a controlled fault as permitted by the site's procedure.
Keep the ABB S1-M2-25 ,1SAM201907R1102 as-left settings, measured values and sign-off together. Release the asset only after its normal control or protection sequence has been observed.
Receipt and installation
At goods receipt, compare the delivered ABB S1-M2-25 ,1SAM201907R1102 code, packaging and included accessories with the approved order. Do not rely on the seller's short description alone.
Fit ABB S1-M2-25 ,1SAM201907R1102 with the specified cable, terminal unit, orientation and tightening instructions. Record any deviation from the old assembly for engineering review before energization.
Supplier and maintenance handover
A request for ABB S1-M2-25 ,1SAM201907R1102 should include the full model string, quantity, asset tag and required delivery condition. Require explicit disclosure of any offered alternative.
File the ABB S1-M2-25 ,1SAM201907R1102 purchase confirmation, delivered label and acceptance results with the maintenance record so later replacements use verified evidence.
Related configuration references
The following S1-M2-25 notation is grouped with ABB S1-M2-25 ,1SAM201907R1102 for enquiry only. Compare exact options, rating and connector fit; listing is not proof of interchangeability.
No other unassigned S1-M2-25 code is grouped with ABB S1-M2-25 ,1SAM201907R1102 in this release.
Closeout checklist
Confirm the final ABB S1-M2-25 ,1SAM201907R1102 article, installation position and test record against the purchase requirement.
Retain the ABB S1-M2-25 ,1SAM201907R1102 acceptance and approval trail for the next maintenance cycle.
