Technical service profile for ABB S201P-B10
ABB S201P-B10 should be specified as a complete device, not inferred from a similar family name. Its protection, control or measurement role must match the actual equipment and installation.
Technical data for model selection
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | S201P-B10 |
| Product family | S201P |
| Component role | single-pole S200P miniature circuit breaker |
| Poles | 1 |
| Rated current | 10 A |
| Trip curve | B |
| Order code | 2CDS281001R0105 |
| Series | S200P high-performance range |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The stated S201P-B10 data identify the selected reference and its engineering boundaries. Confirm the unit label, applicable standard and exact options before ordering or energizing.
Design intent
The intended duty of S201P-B10 is to protect a 10 A single-pole feeder in the specified panel. Mark the circuit, asset or process tag and preserve the plant drawing that governs this function.
Do not assume a different suffix within S201P provides the same duty as S201P-B10; ratings and accessory arrangements can differ.
Fault-finding baseline
For a future fault involving S201P-B10, keep records of upstream supply, load, trip or output state and connected accessories. This separates a device issue from a wiring or process issue.
A replacement S201P-B10 should be checked at the same duty point as the prior installation, with abnormal behavior investigated before return to service.
What must match
Check S201P-B10 against fault capacity, terminal size, B-curve suitability and agency approvals. In procurement, ask for photographs or ABB documentation that show the complete designation and terminal configuration.
If the candidate S201P-B10 differs from the installed device, document the difference and obtain an engineering decision before fitment.
Handover evidence
For S201P-B10, check downstream circuit and protective coordination. Record the measured result, witness and date beside the equipment tag.
Retain the final S201P-B10 designation, revision, settings and test outcome in the maintenance record so later work does not rely on memory.
Installation controls
Before working on S201P-B10, apply the approved isolation and permit controls. Capture the existing connections, settings and safety functions as a recoverable baseline.
Install S201P-B10 with the correct conductor, panel spacing and environmental protection. Follow the ABB instructions for the specific construction rather than using a generic wiring assumption.
Related model references
The following S201P codes are indexed with ABB S201P-B10 for search and enquiry. They remain configuration-specific; this grouping does not assert electrical, mechanical or approval interchangeability.
- S201P-B6-230/400VAC-25000, 2CDS281001R0065
- S201P-K32A-230/400VAC-15000, 2CDS281001R0537
Enquiry checklist
Send the exact ABB S201P-B10 designation with circuit or plant tag, required rating, accessories and approval. Confirm current lifecycle and delivery scope.
On receipt of S201P-B10, compare label, package contents and documentation to the approved request. Hold any discrepancy for review before fitting.
