Service and interface record: ABB S304P-C2 ,2CDS384001R0024
Use ABB S304P-C2 ,2CDS384001R0024 as the complete reference for this equipment position. Matching a family name alone does not establish module fit, electrical ratings or permitted service configuration.
Technical parameters and limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | S304P-C2 ,2CDS384001R0024 |
| Product family | S304P |
| Component role | four-pole S300P industrial circuit breaker |
| Poles | 4 |
| Rated current | 2 A |
| Trip curve | C |
| ABB order code | 2CDS384001R0024 |
| Series | S300P |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
The S304P-C2 ,2CDS384001R0024 values above are selection checkpoints. Check the fitted nameplate and current ABB installation documents before releasing a replacement or changing field wiring.
Before energizing
Isolate the affected circuit before working on S304P-C2 ,2CDS384001R0024, following the plant procedure. Preserve wiring photos, parameters and a known-good diagnostic snapshot.
Seat and terminate S304P-C2 ,2CDS384001R0024 with the specified accessories. Check grounding, segregation and installation environment before power is restored.
Asset purpose
ABB S304P-C2 ,2CDS384001R0024 is intended to protect the specified four-pole low-current circuit. Record the cabinet, circuit or loop tag and the controlled process so the purchase is linked to a defined duty.
A S304P-C2 ,2CDS384001R0024 replacement request should identify the installed hardware revision and the reason for change, including any active alarm or failed test.
Connection evidence
For S304P-C2 ,2CDS384001R0024, inspect voltage, fault rating, neutral policy and coordination. Verify the exact terminals, power path, mechanical keying and software interface against the site drawing.
If a proposed S304P-C2 ,2CDS384001R0024 has different connectors or ratings, stop the swap and document the engineering decision rather than assuming series compatibility.
Diagnostic baseline
For later troubleshooting of S304P-C2 ,2CDS384001R0024, capture supply status, module diagnostics, output state and the relevant process reading. This makes it possible to distinguish a device fault from a field issue.
Compare S304P-C2 ,2CDS384001R0024 with the pre-change baseline after installation. Investigate unexpected alarms, temperature, noise or switching before returning the asset to normal duty.
Acceptance test
For S304P-C2 ,2CDS384001R0024, verify all-pole switching and circuit insulation. Record the result, witness and acceptance date, including any temporary bypass or inhibited alarm that must be removed.
Close the S304P-C2 ,2CDS384001R0024 work order only when as-left settings and drawings reflect the actual installation.
Other configuration references
These S304P references are indexed alongside ABB S304P-C2 ,2CDS384001R0024 for enquiry. Different options, ratings or approvals may apply, so the codes are not automatic substitutes.
- S304P-C32, 2CDS384001R0324
Procurement handoff
Quote ABB S304P-C2 ,2CDS384001R0024 exactly, including the application tag, required accessories, installation conditions and documentation revision.
At receipt, compare the supplied S304P-C2 ,2CDS384001R0024 against the approved code before fitting. Retain the acceptance evidence with the asset record.
