How to confirm S802S-UCK32 in service
Keep the entire S802S-UCK32 designation with the maintenance request. S802S-UCK32 belongs to a specific equipment design; the visible family name alone is insufficient for a replacement decision.
Product data and selection limits
| Technical item | Verified value / selection note |
|---|---|
| Complete designation | S802S-UCK32 |
| Product family | S802S UC |
| Component role | two-pole high-performance breaker |
| Poles | 2 |
| Rated current | 32 A |
| Trip characteristic | K |
| Breaking class | Confirm rated voltage and 50 kA duty on exact order code |
| Order code | 2CCS862001R1537 |
| Final configuration | Confirm exact nameplate, hardware revision and order options before purchase |
For S802S-UCK32, the table identifies useful checks but does not replace the marked unit and its complete technical documentation. Confirm option and revision details before purchase.
What the replacement must match
Before substituting S802S-UCK32, compare voltage, DC polarity, prospective fault current, inrush and termination style. Check the exact code and nameplate against the purchase specification.
Do not call another S802S UC designation a direct replacement for S802S-UCK32 solely because its enclosure looks similar. Ratings and fitted options require separate confirmation.
Equipment role
The installed role of S802S-UCK32 is to protect the specified AC or DC equipment feeder. Write down the connected circuit, controller or process tag and the equipment being served.
A failure around S802S-UCK32 may also arise from the supply, sensor, wiring, communications or mechanical accessory. Capture the symptoms before removing parts.
Commissioning handover
After fitting S802S-UCK32, confirm marked ratings and test the switching and protective installation. Record the test method, readings, settings and any open deviation.
Release S802S-UCK32 for service only after the relevant protection, communication or measurement response has been witnessed and the asset record is updated.
Field fault isolation
For an unexplained S802S-UCK32 fault, note the present indicators and alarm history. Measure only at safe accessible test points according to the plant procedure.
When S802S-UCK32 interacts with a controller or protective system, verify the upstream command and downstream response independently before deciding which component failed.
Related family designations
These S802S UC designations are included with S802S-UCK32 to support model searches and enquiries. Individual specifications can differ, and they are not automatically interchangeable.
No other unassigned S802S UC code is grouped with S802S-UCK32 here.
Ordering record
Retain the S802S-UCK32 nameplate image, purchase code and configuration note with the quotation. Include the commissioning results when the unit is installed.
If a future S802S-UCK32 replacement is required, compare its complete code with the installed record again rather than relying on this page alone.
